442956

Fender Cyber-Twin SE Manual

28
Zoom out
Zoom in
Previous page
1/36
Next page
wwwwww
..
ffeennddeerr..ccoomm
✧
wwwwww
..mmrrggeeaarrhheeaadd..nneett
Appendix 3 SysEx ◊ MIDI Dump
This appendix contains tables describing the System Exclusive message
components and protocol for MIDI Dump. The SysEx device ID must be set
to Omni (or the same as the transmitting device ID) to accomplish the data
transfers. NOTE: Data values are displayed in hexadecimal with “H” for
clarification.
28
System Exclusive Data Packet
System Exclusive End of File Message
System Exclusive Header
VALUE DESCRIPTION
F0H Start of System Exclusive Message
08H Fender Manufacturer ID
nnH nn = Device ID (minus one)
12H Amp ID number 12H. The upper nibble identifies the Cyber-Twin® SE amplifier and the lower nibble designates software version.
ffH Function ID number (01H=Utilities message; 02H=One preset message; 03H=All presets message)
F7H End of System Exclusive Message
VALUE DESCRIPTION
F0H Start of System Exclusive Message
08H Fender Manufacturer ID
nnH nn = Device ID (minus one)
12H Amp ID number 12H. The upper nibble identifies the Cyber-Twin® SE amplifier and the lower nibble designates software version
ffH Function ID number (01H=Utilities message; 02H=One preset message; 03H=All presets message)
PnH Packet Number
Data Data bytes: The data bytes have been formatted following the MIDI Specification
cbH Checksum byte used for error checking
F7H End of System Exclusive Message
VALUE DESCRIPTION
F0H Start of System Exclusive Message
08H Fender Manufacturer ID
nnH nn = Device ID (minus one)
12H Amp ID number 12H. The upper nibble identifies the Cyber-Twin® SE amplifier and the lower nibble designates software version
ffH Function ID number (01H=Utilities message; 02H=One preset message; 03H=All presets message)
7BH End of System Exclusive File Byte
F7H End of System Exclusive Message
VALUE DESCRIPTION
F0H Start of System Exclusive Message
08H Fender Manufacturer ID
nnH nn = Device ID (minus one)
21H Amp ID number 21H. The upper nibble identifies the Cyber-Twin® SE amplifier and the lower nibble designates software version.
04H Message ID number for additional parameter controls.
23H ID number indicating request for a MIDI Dump
00H Unused Data Byte
00H Unused Data Byte
00H Unused Data Byte
ddH Dump ID byte: 01H = Transmit Utilities, 02H = Transmit One Preset, 03H = Transmit All Presets
7BH End of System Exclusive File Byte
F7H End of System Exclusive Message
MIDI Dump Initiation Message
Appendices
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fender Cyber-Twin SE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fender Cyber-Twin SE in the language / languages: English as an attachment in your email.

The manual is 3,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info