442956

Fender Cyber-Twin SE Manual

8
Zoom out
Zoom in
Previous page
1/36
Next page
wwwwww
..
ffeennddeerr..ccoomm
✧
wwwwww
..mmrrggeeaarrhheeaadd..nneett
This page introduces key concepts for the basic operation of your
Cyber–Twin SE™. The following pages provide an overview of each item
on the front and rear panels.
The DISPLAY shows vital information and menus for the Cyber-Twin
®
SE.
The DATA WHEEL works dynamically with the display giving you full control
over preset selection, effect parameters and system configuration. The
display also responds to the use of panel knobs or buttons providing
useful information. You can enter different MODES to edit amplifier designs,
effects and system utilities; each mode determines the functions of the
display and data wheel.
PLAY MODE is active whenever the Cyber-Twin
®
SE amplifier is first
switched on. After booting up, the display will show information about the
current preset. The first line displays the preset location (bank/number)
and name. The second line displays the type of tone stack controls (treble,
middle, bass), tone stack location (pre/post distortion) and the active
effect. In play mode, the data wheel selects presets.
There are three banks of PRESETS. The FENDER CUSTOM SHOP (C00-C99)
and YOUR AMP COLLECTION (A00-A49) are permanent presets. The
PLAYER’S LOUNGE (P00-P99) presets are rewritable for you to save your own
amp and effect designs.
The Cyber-Twin
®
SE is instantly reconfigured to the settings saved within
a selected preset. The 8 MOTORIZED knobs on the Cyber-Twin
®
SE
automatically adjust to the preset settings. You can safely interrupt knob
rotation anytime by manually stopping it. Note that the display will
temporarily indicate knob position when turned manually.
Changes you make to amplifier settings (volume, tone, effects, etc.) will be
lost upon selecting a different preset or turning the amplifier off, unless you
save them. SAVE simply by pressing SAVE, selecting a Player’s Lounge
preset to overwrite and pressing SAVE again. The SAVE LE
D


blinks
as a reminder to save settings once a change is made. NOTE: MEMORY
PROTECTION must be disabled before you can save! (see page 24).
AMP EDIT MODE, FX EDIT MODE and UTILITY MODE are activated by pressing
the corresponding buttons to the right of the display. Use these modes for
modifying amp design, selecting and editing effects and for system
management. TUNER MODE is activated using the TUNER button; use it to
tune your guitar. PLAY MODE is reactivated by pressing EXIT. Use it to play
guitar!
Two FOOTSWITCHES are supplied with your Cyber-Twin
®
SE. Connect them
to the appropriate rear panel jacks to enable remote selection of your
Quick Access buttons and Reverb/Effects bypass.
Each preset contains a complete set
of amplifier and effects settings.
wwwwww
..
ffeennddeerr..ccoomm
✧
wwwwww
..mmrrggeeaarrhheeaadd..nneett
8
Front Panel Overview
1
1
✧
✧
Over
Over
view
view
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fender Cyber-Twin SE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fender Cyber-Twin SE in the language / languages: English as an attachment in your email.

The manual is 3,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info