CHORUS — Parameter value definitions
Level Amount of the Chorus effect (0 is off, 127 is maximum)
Rate Sweep rate of the Chorus effect (0.08 Hz selected as 0 is slowest, 10 Hz selected as 127 is fastest)
Depth Amount of Doppler frequency shift and how apparent the Chorus effect sounds (0 is minimum, 127 is maximum)
Average Delay Time Average delay time of the moving Chorus taps (repeats), use higher settings for doubling effect (0 is shortest, 127 is longest)
Left/Right Phase
1
Stereo - Phase between left and right channel low frequency oscillators (0 is minimum stereo effect, 127 is maximum stereo effect)
FLANGE — Parameter value definitions
Level Amount of the Flange effect (0 is off, 127 is maximum)
Rate Sweep rate of the Flange effect (0.08 Hz selected as 0 is slowest, 10 Hz selected as 127 is fastest)
Depth Amount of Doppler frequency shift and how apparent the Flange effect sounds (0 is minimum effect, 127 is maximum effect)
Feedback Amount of the Flange signal that is fed back into the Flange circuit (0 is minimum feedback, 127 is maximum feedback)
Left/Right Phase
1
Stereo - Phase between left and right channel low frequency oscillators (0 is minimum stereo effect, 127 is maximum stereo effect)
PHASER — Parameter value definitions
Level Amount of the Phaser effect (0 is off, 127 is maximum)
Rate Sweep rate of the Phaser effect (0.08 Hz selected as 0 is slowest, 10 Hz selected as 127 is fastest)
Depth Width of the Phaser sweep and how apparent the Phaser effect sounds (0 is minimum, 127 is maximum)
Feedback Amount of Phaser effect processed signal that is fed back (recycled) to the input (0 is minimum feedback, 127 is maximum feedback)
Stereo Spread
1
Stereo - Amount of stereo separation between left and right channels (0 is minimum stereo effect, 127 is maximum stereo effect)
TREMOLO — Parameter value definitions
Level Amount of the Tremolo effect (0 is off, 127 is maximum)
Rate Cycle rate of the Tremolo effect (0.08 Hz selected as 0 is slowest, 10 Hz selected as 127 is fastest)
Depth Amount the volume level drops with each cycle of the Tremolo effect (0 is minimum depth, 127 is maximum depth)
Offset Offset of the low-frequency oscillator (0 is minimum, 127 is maximum)
Shape Smoothness of the Tremolo waveform (0 is subtle and natural, 127 is choppy and percussive)
VIBRATONE — Parameter value definitions
Level Amount of the Vibratone effect (0 is off, 127 is maximum)
Rotor Speed Rate of the virtual rotating speaker baffle (0.08 Hz selected as 0 is slowest, 10 Hz selected as 127 is fastest)
Doppler Frequency Shift Amount of Doppler frequency shift and how apparent the Vibratone effect sounds (0 is minimum shift, 127 is maximum shift)
Low-Pass Filter Range Amount of high frequencies in the Vibratone signal (0 is minimum, 127 is maximum)
Amplitude Modulation Depth Amount the volume level varies with each cycle of the Vibratone effect (0 is minimum, 127 is maximum)
Modulation effect parameter
Continuous Controller
numbers
1
This parameter modifies the stereo capabilities of your Cyber–Champ™ amplifier which can be enjoyed using the PHONES output jack.