Manual Fender Blues-De Ville Re-issue (page 6 of 20) (English)

442934

Zoom out

Zoom in

1/20

A. INPUT 1 - Plug in connection for most guitars.

B. INPUT 2 - A lower sensitivity (-6dB) than INPUT 1, offering

cleaner response with high-output instruments or a darker

tone with “passive” instruments. If both inputs are used

simultaneously, both input sensitivities become identical.

C. CHANNEL SELECT - Press to switch channels:

Normal—use the VOLUME {E} control

Drive—use DRIVE {F} and MASTER {G} controls

D. CHANNEL INDICATOR -

Off



Normal channel is active

Red







Drive channel is active

E. VOLUME - Adjusts the loudness of the Normal channel.

F. DRIVE - Adjusts the preamp volume and distortion level

of the Drive channel.

G. MASTER - A final adjustment for the overall loudness of

the Drive channel. After you set the DRIVE {F} level, use

MASTER to normalize the Drive channel volume.

H. NORMAL/BRIGHT - Boosts high-frequency response.

Normal Bright (boost)

I. MIDDLE/BASS/TREBLE - Adjusts the mid/low/high

frequency tone characteristics, respectively.

J. PRESENCE - Adjusts ultra-high tone characteristics after

the preamp distortion stage, producing a special high-

frequency sparkle.

K. REVERB - Adjusts the Reverb effect level.

L. PREAMP OUT / POWER AMP IN -

(1) Effects Loop - Connect PREAMP OUT to your effects

input, and POWER AMP IN to the effects output.

(2) Multiple Amps - Connect PREAMP OUT on the

primary unit to POWER AMP IN on the auxiliary unit. The

primary unit is used to control the auxiliary unit, except for

Reverb and Presence which remain active on each unit.

(3) Recording or Reinforcement - Connect PREAMP

OUT to the input of sound equipment.

Use shielded instrument cables with PREAMP

OUT and POWER AMP IN. Both jacks are located before

Reverb and Presence in the signal path.

M. FOOTSWITCH - Connect the included footswitch to

enable remote Channel and Reverb switching. When

connected, the footswitch overrides the corresponding

panel controls. NOTE: Use unshielded speaker cable

rather than instrument cable for connecting the

footswitch.

N. POWER INDICATOR - Illuminates when the Blues DeVille

is on. Unscrew the red jeweled cover to access the bulb

(type T47) for replacement.

O. STANDBY - Switch into Standby instead of turning the

power off during short breaks to keep the tubes warm and

ready to play; switch into Standby before turning the

power on — and stay in Standby for 30 seconds after the

power is on. These procedures will extend the life of your

amplifier tubes.

P. POWER SWITCH - Turns the Blues DeVille on-off.

Your new Blues DeVille amplifier delivers world–class

Fender

tone and world–standard Fender

quality:

• 60 watts output into 4Ω or 8Ω

• All tube preamp and power amp provide harmonically

rich distortion and touch-sensitive dynamics

• Selectable channels offer sparkling-clean and high-

gain tones fueled by three 12AX7 preamp tubes

• Performance tested and matched GT6L6B Fender

Groove Tubes™

• Two-button footswitch (included) enables remote

channel selection and Reverb on-off switching

• Multi-function Preamp out / Power amp in jacks

• External speaker jack allows optional speaker arrays

Thank you for choosing Fender

—T

one, T

radition and Innovation—since 1946

✧

ff ee nn dd ee rr .. cc oo mm

✧

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fender Blues-De Ville Re-issue in the language / languages: English as an attachment in your email.

The manual is 7,22 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fender Blues-De Ville Re-issue Manual

Product: