Manual Fender 65 Super Reverb-Amp (page 7 of 20) (English)

442902

Zoom out

Zoom in

1/20

wwwwww

ffeennddeerr..ccoomm

✧

wwwwww

..mmrrggeeaarrhheeaadd..nneett

TYPE: PR 469

PART NUMBERS: 021-7600-000, 120V, 60Hz (USA), 021-7660-000, 230V, 50Hz (Europe),

021-7640-000, 230V, 50Hz (UK), 021-7630-000, 240V, 50Hz (Aust),

021-7670-000, 100V, 50-60Hz (Japan)

POWER REQUIREMENTS: 270W

FUSE TYPE: 100V-120V models: 3A, fast-blow, 125V minimum,

230-240V models: 1. 6A, fast-blow, 250V minimum,

IMPEDANCES Inputs 1: 1M ohms (both channels)

Inputs 2: 136K ohms (both channels)

Output: 2 ohms

SPEAKER COMPLEMENT: Four 10 in. (25.4 cm) vintage reissue, P/N 055613

DIMENSIONS Height: 24 7/8 in. (63. 2 cm)

Width: 25 1/8 in. (63. 8 cm)

Depth: 10 1/2 in. (26. 7 cm)

WEIGHT: 65 lbs. (24. 3 kg)

Product Specifications are subject to change without notice.

R. IEC POWER SOCKET - The line cord must be

connected to a grounded AC receptacle in accor-

dance with the voltage and frequency ratings as

specified on the rear panel of the unit.

S. FUSE - Replace a blown fuse only with a fuse of the

type and rating as specified on the rear panel of the

unit. If the amp repeatedly blows fuses, have the unit

tested by an authorized Fender service technician.

T. POWER - Switches the unit ON and OFF.

U. STANDBY - In standby mode, power is supplied only

to the tube filaments to keep them warm and ready

to operate. Use standby during short breaks to

eliminate warm-up time and extend the life of the

tubes.

V. MAIN SPEAKER JACK - This is the primary speaker

connection. Speakers (internal or external) must

always be connected here while operating the unit.

W. EXTERNAL SPEAKER JACK - Plug in external

speakers here. This jack is wired in parallel with the

main speaker jack.

*** NOTE: The amp is optimized for a 2 ohm speaker

load, which is the rating of the internal speaker

configuration. If a speaker load other than 2 ohms is

used, the amplifier will distort before reaching

maximum output, and the life of the tubes will be

reduced. Two external 4 ohm speaker cabinets

would provide the recommended 2 ohm load.

X. FOOTSWITCH - Plug the included footswitch in here

to enable remote on/off switching of Reverb and

Vibrato.

*** NOTE: Vibrato will NOT work without the footswitch

connected, but the reverb effect will.

Y. REVERB OUTPUT / INPUT - RCA jack connections

for routing the reverb signal to and from the reverb

pan.

®®

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fender 65 Super Reverb-Amp in the language / languages: English as an attachment in your email.

The manual is 3,54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fender 65 Super Reverb-Amp Manual

Product: