Manual Fender 64 Vibroverb Custom-Amp (page 6 of 20) (English)

442896

Zoom out

Zoom in

1/20

wwwwww

ffeennddeerr..ccoomm

✧

wwwwww

..mmrrggeeaarrhheeaadd..nneett

Your new ‘64 Vibroverb™ Custom amplifier is a modern

interpretation of a Fender

legend. With this amp,

guitarists can enjoy the original Blackface™ Fender

tones heard on countless Country, Jazz and Rock

recordings. Then, with the flip of a couple of switches,

“modify” the amp to create cranked-up tones bristling

with sustain and harmonics. These Vibroverb

modifications were perfected by César Diaz, world

famous “Amp Doctor,” who worked closely with Fender

during the inception of this new model. Original 1964

Vibroverbs are hard–to–find collectables, and are

particularly prized by players who enjoy the “Texas

Blues” style. Your brand new Vibroverb will allow you to

put a fresh spin on a classic theme.

• Two fully independent channels, each with input jacks

for normal- and high-gain instruments

• 40 watts output power into 8Ω or 4Ω

• Special Design Eminence

15" speaker

• Selectable TUBE or solid-state DIODE rectifier

• Selectable STOCK or MODIFIED amp configuration

• All–tube circuitry (STOCK amp configuration selected):

• USA made, GT-6L6 GE (Power amp) tubes

• 12AX7A (Preamp, Vibrato) tubes

• 12AT7 (Reverb, Phase–splitter) tubes

• 5AR4 (Rectifier) tube

• Two-button Footswitch (included) for remote on/off

control of Reverb and Vibrato

• Hand-wired “Eyelet Board” circuit

• Finger–jointed pine cabinet

• Tilt-back cabinet legs for easy monitoring

Thank you for choosing Fender

—T

one, T

radition and Innovation—since 1946

NORMAL CHANNEL

A. NORMAL INPUT 1 - Plug-in connection for most

instruments.

B. NORMAL INPUT 2 - Plug-in connection for high

output or pre-amplified instruments. Provides 6dB

less gain than input 1.

C. BRIGHTNESS SWITCH - Boosts high-frequency

response. Most effective at low volume, the boost

tapers off as the VOLUME setting increases.

D. NORMAL CHANNEL VOLUME - Adjusts the

loudness of the amplifier.

E. TREBLE - Adjusts the high-frequency tone.

F. BASS - Adjusts the low-frequency tone.

VIBRATO CHANNEL

G. VIBRATO INPUT 1 - Plug in connection for most

instruments.

H. VIBRATO INPUT 2 - Plug in connection for high

output or pre-amplified instruments. Provides 6dB

less gain than input 1.

I. BRIGHTNESS SWITCH - Boosts high-frequency

response. Most effective at low volume, the boost

tapers off as the VOLUME setting increases.

J. VIBRATO CHANNEL VOLUME - Adjusts the

loudness of the amplifier.

K. TREBLE - Adjusts the high-frequency tone.

L. BASS - Adjusts the low-frequency tone.

M. REVERB - Adjusts the Reverb level. Reverb can be

toggled ON/OFF from the footswitch.

N. VIBRATO SPEED - Adjusts the rate of volume

variation. Plug in the footswitch, toggle VIBRATO

ON to activate, see FOOTSWITCH {X}.

O. VIBRATO INTENSITY - Adjusts the depth of volume

variation. Plug in the footswitch, toggle VIBRATO

ON to activate, see FOOTSWITCH {X}.

P. PILOT LAMP - Illuminates when the amp is powered

ON. Unscrew the red jeweled cover to access the

bulb (type T47) for replacement.

™

Fender

/Groove Tubes™ GT-6L6 GE

The output tubes in your new Vibroverb

amplifier are performance matched

and labeled as a color-coded pair. When

replacing these tubes, we recommend selecting

new tubes that have the same red, white or blue

color labels as the originals. Otherwise, tube

bias may need adjustment.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fender 64 Vibroverb Custom-Amp in the language / languages: English as an attachment in your email.

The manual is 4,97 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fender 64 Vibroverb Custom-Amp Manual

Product: