624624

Felt Z series Disc Carbon Manual

5
Zoom out
Zoom in
Previous page
1/8
Next page
76
CABLE ROUTING
MECHANICAL
A: Feed Front Derailleur Cable into Mousetail
Ferrule and downtube via Cable Stop as pictured.
Pull cable taut as it exits the bottom bracket hole.
B: The grommet on the end of the cable housing
should fit snugly into the Cable Stop.
C: Repeat the previous steps with the Rear
Derailleur Cable.
A: Slide the mousetail over the Front
Derailleur Cable until at least 2” of cable is
exposed. Pull both cables to ensure tautness
and confirm they cross over each other in the
downtube, but do not touch each other, or
shifting will be compromised.
B: Route Front Derailleur Cable through small
bottom bracket hole and out Front Derailleur
Grommet Hole as pictured.
Note:
if Front Derailleur
Grommet is installed, remove it
before attempting to route
Front Derailleur Cable.
CABLE ROUTING
MECHANICAL
C: Insert Bottom Bracket Cable Guide as
pictured. Align with frame and press until it
snaps into place. The Front Derailleur Cable
should fit easily in the channel on the non-
drive side of the frame. The Rear Derailleur
Cable should fit easily into the channel on
the drive-side of the frame.
A: Take cable housing and apply a ferrule
to each end. Fit one end into the chainstay
cable housing mount and route Rear
Derailleur Cable through as pictured.
B: Locate the eyelet on the rear derailleur
and route Rear Derailleur Cable though
and fit Ferruled cable housing into
the eyelet.
C: Tension and tighten Rear Derailleur
Cable in the tension bolt assembly.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Felt Z series Disc Carbon at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Felt Z series Disc Carbon in the language / languages: English as an attachment in your email.

The manual is 2,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info