Manual Fellowes Titan laminator (page 6 of 112) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

502533

Zoom out

Zoom in

1/112

Switch the power on (Power switch located at the rear

of the machine).

Select the ‘Standby’ button on the control panel. Check

the LED controls turn on. The 75 micron and ready

LED’s will flash for 5 seconds before automatically

selecting the 75 micron heat setting. Any setting can be

selected at any time as required. To open the machine,

it is normal for the machine to cool before opening.

The LED interface allows selection of these functions:

- 75,100,125,175,250 micron pouch settings

- Manual laminating

- Reverse

- ‘Easi-access’ to service the mechanism

The laminator will automatically select the thinnest

pouch setting (75 micron) within 5 seconds of power-on

unless another setting is selected. During warm-up or

warm-down, the selected pouch setting will flash red.

When the laminator has reached the chosen setting, the

LED will stop flashing and glow red. The machine will

sound 2 short alerts.

Place item into open pouch. Ensure the item is centred

against the sealed front edge. Use the appropriate

pouch size for the item.

Place the pouch, sealed edge first into the document

entry. Keep the pouch straight and central within the

document entry, not on an angle. Use the entry mark-

ings as a guide.

Upon exit, the laminated pouch is hot and soft. Take

care and remove the pouch immediately. Place the

pouch onto a flat surface to cool. This helps prevent any

jamming.

To reverse the laminating process at any stage, press

and hold the ‘Reverse’ button to eject the item. The

laminator will sound alerts continuously and the ready

LED will flash.

STEPS TO LAMINATE

Let our experts help you with a solution.

Customer Service:

www.fellowes.com

Help Line Europe: 00-800-1810-1810

NEED HELP?

Ensure the machine is on a stable surface. Check there

is enough clear space (min 50cm) behind the machine

to allow items to pass through freely.

Select the correct power lead for the appropriate power

supply. Fit the lead to the machine (the socket is at the

rear of the machine).

Plug the machine into an easily accessible mains socket.

Switch the mains supply on.

To fully support pouches and items of different sizes

please use the adjustable entry guide to centre the item

before laminating. Place exit tray onto the rear of the

machine.

SETTING UP THE LAMINATOR

10.

11.

12.

404415_2_EUR_Titan_All_v3.0.indd 6 25/09/2009 09:21:14

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fellowes Titan laminator in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 27,76 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fellowes Titan laminator Manual

Product: