502531
18
Zoom out
Zoom in
Previous page
1/24
Next page
18
CARACTERÍSTICAS
- Enchufe la máquina a una toma eléctrica de fácil acceso.
- Para evitar una descarga eléctrica - no utilice la máquina cerca del agua, no derrame agua sobre la máquina, el cable o el enchufe.
ASEGURARSE de que la máquina se encuentra sobre una superficie estable.
PRUEBE a plastificar trozos de hoja y ajuste la máquina antes de los plastifi-
cados definitivos.
RETIRAR las grapas y otros objetos de metal antes de plastificar.
MANTENER la máquina alejada de fuentes de calor y de agua.
APAGAR la máquina después de cada uso.
DESCONECTAR la máquina de la toma cuando no vaya a ser utilizada
durante un largo período de tiempo.
UTILIZAR bolsas diseñadas para el uso con la configuración apropiada.
MANTENERLA alejada de los animales cuando se esté utilizando.
ASEGURARSE de que las bolsas autoadhesivas sólo se utilicen con el ajuste
frío.
NO dejar el cable de corriente en contacto con superficies calientes.
NO dejar el cable de corriente colgando de armarios o estanterías.
NO utilizar la máquina si el cable de corriente está dañado.
NO intentar abrir o reparar la máquina.
NO sobrepasar el rendimiento estimado de la máquina.
NO permitir a los niños utilizar esta máquina sin la supervisión de un adulto.
NO plastificar objetos afilados o de metal (p. ej: grapas, clips de papel).
NO plastificar documentos sensibles al calor (p. ej.: tiquets, ultrasonidos, etc.)
en ajustes calientes.
NO plastificar con bolsas autoadhesivas en ajustes calientes.
NO plastificar una bolsa vacía.
INSTRUCCIONES IMPORTANTES DE SEGURIDAD - CONSÉRVELAS PARA UN USO FUTURO
Colocar siempre el elemento en la bolsa del tamaño adecuado.
Probar siempre la plastificación con un tamaño y grosor similares
antes del proceso final.
Si es necesario, recortar cualquier exceso de material alrededor del
objeto después de la plastificación y el enfriamiento.
Para un mejor resultado, utilizar las bolsas de la marca Fellowes ®:
Enhance 80, Impress 100, Capture 125, Protect 175, Preserve 250
(Enhance 80: bolsa en frío)
Cuando se trabaje con diferentes grosores de bolsa (configuración de
temperatura), se recomienda comenzar con las bolsas más finas.
Preparar una bolsa y un objeto a plastificar. Colocar el objeto dentro
de una bolsa centrada y tocando la guía delantera. Asegurarse de que
la bolsa no es demasiado grande para el objeto.
CARACTERÍSTICAS & CONSEJOS
Rendimiento Datos técnicos
Formato A3 Tensión / Frecuencia / Corriente(A) 220-240 V CA, 50/60 Hz, 5 A
Anchura de entrada 320 mm Vatiaje 1000 Vatios
Grosor de la bolsa (mín.) 75 micrones (por lado) Dimensiones (Al x An x F) 58 x 30 x 14 cm
Grosor de la bolsa (máx.) 250 micrones (por lado) Peso neto 15 kg
Tiempo de calentamiento aproximado 3 minutos Capacidad de plastificadora
Grosor del documento máx. = 2 mm (0,08”)
Tiempo de enfriado 30-60 minutos Mín. bolsa = 75 micrones
Velocidad de plastificado Velocidad variable (0-95 cm/min) (grosor total = 2x75 = 150 micrones)
Número de canutillos 6 Máx. de la bolsa = 250 micrones
Indicación de "Ready" (listo) Iluminación (grosor total = 2 x 250 = 500 micrones)
Función de retroceso
Botones de toque suave + pitido
Interfaz LED
Apto para fotografías
Sin transportador
Placa de refrigeración externa
ESPAÑOL
ES
405600_EUR_Proteus_All_v1.5.indd 18 12/23/2010 1:50:37 PM
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fellowes Proteus laminator at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fellowes Proteus laminator in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info