Switch the power on (located at the rear of the machine). Cold lamina-
tion is the default function setting when power is switched on.
Select the “HOT” function. The temperature will automatically select
90°c. The rollers will start turning when the temperature is above 60°c.
When “READY” lamp is on, the machine is ready to start laminating.
Select the motor speed best suited to the pouch thickness (see graph on
machine) EG: 80 micron pouch = motor speed 5 / 90°c. The machine
will automatically select the optimum laminating temperature. Lami-
nating temperatures can also be adjusted manually as required.
Ensure the machine is on a stable surface.
Check there is enough clear space (min 50cm) behind the machine to
allow items to pass through freely.
Select the correct power lead for the appropriate power supply. Fit the
lead to the machine (the socket is at the rear of the machine).
Plug the machine into an easily accessible mains socket. Switch the
mains supply on.
Ensure the ‘Cooling Plate’ is fitted correctly with the graphics “Top
Side” visible.
6
Cold lamination is the default function setting when power is switched on. Cold lamination can only operate when the rollers run at a temperature below
30°c. Press the “MEAS” button to measure the roller temperature.
4.
5.
1.
2.
3.
BEFORE LAMINATING
STEPS TO COLD LAMINATE
Switch off the machine at the wall. Allow the machine to cool. The outside of the machine can be cleaned with a damp cloth. Do not use solvents or flammable
materials to polish the machine. Cleaning sheets can be used with the machine. When the machine is warm – run the sheets through the machine to clean any
residue off the rollers. For optimum performance, it is recommended that cleaning sheets are used with the machine regularly.
STORAGE & CLEANING
Switch the power on (located at the rear of the machine).
Select the “COLD” function. Wait for roller temperature to fall below
30°c.
When “COLD” & “READY” lamp is on, select speed 2 or 3 and laminate
cold pouches.
1.
2.
3.
To preserve the rollers, do not switch off the machine when it is hot.
STEPS TO HOT LAMINATE
Select “COLD” function. The machine will set temperature at 0°c and
motor speed at “2”. When the roller temperature has cooled to below
60°c, the rollers will stop automatically.
Switch off the power using the switch at the back of the machine.
Unplug the power cord.
1.
2.
3.
STEPS TO SWITCH OFF THE MACHINE
1.
2.
3.
4.
REPLACING THE FUSE
This machine is fitted with a fuse, located between the mains switch and the mains socket on the rear of the
machine. To replace the fuse:
• Isolate the machine from the mains supply.
• Open the fuse holder with a screwdriver blade.
• Insert a new fuse in the holder and replace the holder into the machine.
Note: Always use the recommended fuse and DO NOT replace it with one of a different rating.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Fellowes Proteus laminator at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Fellowes Proteus laminator in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.
The manual is 1,5 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
