502673
9
Zoom out
Zoom in
Previous page
1/112
Next page
9
Problem Possible cause Solution
No lights showing on Cutting base or
Scissor Icon
Machine is not switched on
Switch on machine at rear next to plug
inlet and at the mains socket
Cut button does not work when pressed
(No function when pressed)
Machine not plugged in
Move the machine to a cooler and dry
area
SafeCut™ Guard not in place
Ensure that SafeCut™ Guard is
securely in place
SafeCut™ Guard not closed
Ensure that SafeCut™ Guard is
closed
Paper is cut but cutting head still moves
along machine still continues to cut
PowerTrim is set to complete 6 cut cycles as
default.
To stop PowerTrim before 6 cycles have
been completed, just press the “scissor
touch button again
Can’t replace cutting strips - not enough
room to lift them
SafeCut™ Clamp closed Open SafeCut™ Clamp
Poor cut quality (Cuts are not very sharp –
edge of cut items not straight)
Cutting strips could be worn out
Turn cutting strip over as described
above to use other side, or replace with
spare part CRC 54125
Cutting blades could be worn out
Replace (with spare part CRC 54125) as
described above
LED warning symbols
Scissor icon is flashing in alternate blue
and red
SafeCut™ Clamp is open when cutting is not
yet complete
Close SafeCut™ Clamp
Scissor icon light is red - no illuminated
cutting base
Motor is too hot when doing continue cut Let trimmer cool down
Scissor icon light not on
SafeCut™ Guard is open or Power not
switched on
Make sure power is switched on and
SafeCut™ Guard is closed
TROUBLESHOOTING
PowerTrim_v2.0_All_Langs.indd 9 12/02/2009 13:59:54
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fellowes PowerTrim at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fellowes PowerTrim in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 21,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info