502529

Fellowes Neptune 2 laminator Manual

4
Zoom out
Zoom in
Previous page
1/52
Next page
4
CAPABILITIES
ENGLISH
- Plug the machine into an easily accessible socket.
- To prevent electrical shock - do not use the appliance close to water, do not spill water on to the appliance, power cord or wall socket.
DO ensure the machine is on a stable surface.
DO test laminate scrap sheets and set the machine before final laminations.
DO remove staples and other metal articles prior to laminating.
DO keep the machine away from heat and water sources.
DO turn off the machine after each use.
DO unplug the machine when not in use for an extended period.
DO use pouches designed for use at the appropriate settings.
DO keep away from pets, while in use.
DO NOT leave the power cord in contact with hot surfaces.
DO NOT leave power cord hanging from cupboards or shelves.
DO NOT use appliance if the power cord is damaged.
DO NOT attempt to open or otherwise repair the machine.
DO NOT exceed the machines quoted performance.
DO NOT allow children to use this machine without adult supervision.
DO NOT laminate sharp or metal objects (eg: staples, paper clips).
DO NOT laminate heat-sensitive documents (eg: tickets, ultrasounds etc).
DO NOT laminate with self-adhesive pouches which require a cold setting.
DO NOT laminate an empty pouch.
IMPORTANT SAFETY INSTRUCTIONS - KEEP FOR FUTURE USE
LAMINATOR CONTROLS
A On / off switch
B Power on button
C Temp button
D Reverse button
E Carry handle
F Pouch / document entry slot
G Entry support shelf
H Pouch / document exit
I Illuminated user interface
J Exit tray (Neptune 2 only)
‘Pouch Protection’ function
The machine includes two ‘Auto-reverse’ functions designed to protect the
laminating pouch. When in use, the machine will:
(1) scan the pouch for creases and errors in loading.
(2) to check for blockages debris within the mechanism
When these errors are detected the machine will automatically operate in
reverse for (1) 5 seconds or (2) 20 seconds to eject any pouch.
‘Safe Start’ function
When switched on, the machine has a default ‘Safe Start’ function which
always starts up at the 80 micron setting. You may select other hot tempera-
ture settings if required. The machine will warm-up and alert the user when
it is ready.
‘Sleep Mode’ function
If the machine is not active for 30 minutes, the ‘Sleep Mode’ function will
place the machine into standby mode. To operate the machine, press the
‘Power On’ button on the control panel.
• For best results, use Fellowes ® brand pouches:
Enhance 80, Impress 100, Capture 125, (Neptune 2 can also use Protect 175
pouches).
• For self-adhesive (cold pouches) only use the cold setting.
• This machine does not need a carrier to laminate. It is a carrier-free
mechanism.
• Always put the item to be laminated into the appropriate sized pouch.
• Always test laminate with a similar size and thickness before final process.
• Prepare pouch and item for lamination. Place item within pouch centred
and touching the leading sealed edge. Ensure the pouch is not too large for
the item.
• If required, trim excess material from around the item after lamination and
cooling.
• When working with different pouch thickness’ (temperature settings) it is
recommended to first start with the thinnest pouches.
FEATURES & TIPS
Performance
Format A3
Entry width 320 mm
Pouch thickness (min) 75 microns (per side)
Pouch thickness (max) 125 microns (per side)
[Neptune 2 = 175 microns]
Warm up time (estimate) minimum 3 minutes
Cool down time 30-60 minutes
Lamination speed (+/- 5%) approx. 45cm/min (fixed speed)
Number of rollers 4
Ready indication Light & beep
Auto & manual reverse function Yes
Clear Path / Anti-jam engine Yes
LED interface Yes
Sleep mode Yes (30 minutes)
Photo-capable Yes
Carrier-free Yes
Carry handles Yes
Exit tray Neptune 2 only
Technical Data
Voltage / Frequency / Current(Amps) 220-240V AC, 50/60Hz, 3.33~3.65A
Wattage 800 Watts
Dimensions (HxWxD) 574 x 179 x 128 mm
Net weight 4.7 kg
Max document thickness
(laminating capacity) 0.7 mm
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fellowes Neptune 2 laminator at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fellowes Neptune 2 laminator in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info