Manual Fellowes Galaxy Wire (page 6 of 92) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

502666

Zoom out

Zoom in

1/92

CORRECTING A BOUND DOCUMENT

REMOVAL OF WASTE CLIPPINGS

WORLDWIDE WARRANTY

Fellowes warrants all parts of the binder to be free of defects in material and workmanship

for 2 years from the date of purchase by the original consumer. If any part is found to be

defective during warranty period, your sale and exclusive remedy will be repair or replacement,

at Fellowes’ option and expense, of the defective part. This warranty does not apply in

cases of abuse, mishandling or unauthorised repair. Any implied warranty, including that of

merchantability or ﬁtness for particular purpose, is hereby limited in duration to the appropriate

warranty period set forth above. In no event shall Fellowes be liable for any consequential

damages attributable to this product. This warranty gives you speciﬁc legal rights. You may

have other legal rights that vary from this warranty. The duration, terms and conditions of this

warranty are valid worldwide, except where different limitations, restrictions or conditions may

be required by local law. For more details or to obtain services under this warranty, please

contact Fellowes or your dealer.

TROUBLESHOOTING

Problem

Cannot close wire comb tightly enough

Damaged hole edges

Waste tray leaks

Punched holes are not central

Machine will not punch

Punch holes are not parallel to edge

Partial hole edges

Sheets fall out of document

Cause

Closing jaws set at too large a diameter

Possibly overloading the machine

Waste tray is not correctly inserted or ‘burst

feature’ has activated

Edge guide not set

Blockage

Debris is stuck below dies

Sheets not correctly aligned to punch pattern

Wire comb is not closed enough

Solution

Revise closure lock setting to suit smaller diameter as required

Punch plastic covers with paper sheets. Reduce number of

sheets being punched

Check waste tray is empty and ‘burst feature’ is closed

Adjust edge guide until hole pattern is correct

Check waste tray is empty. Check for blockage to paper entry

Take stiff cardboard and slide into the paper entry. Move the

cardboard sideways to release any stray clippings into the

waste tray

Adjust edge guide and test punch scrap sheets until correct

Check closure of wire comb. Place into closing mechanism and

improve binding closure. Revise closure lock setting to suit

smaller diameter as required

Wire binding is a secure binding system. Additional sheets cannot be added unless the document is disassembled and then re-bound.

The waste tray is located under the machine and is accessed from each side. For best results empty the tray regularly.

The tray should be emptied after every 50 operations to ensure no blockages occur.

STORAGE

Lower the lid. The Galaxy wire binder is designed to be stored horizontally on the desk.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fellowes Galaxy Wire in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 21,65 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fellowes Galaxy Wire Manual

Product: