Manual Felisatti VCF45 (page 9 of 48) (English, German, French, Italian, Portuguese, Spanish, Finnish)

502519

Zoom out

Zoom in

1/48

GB - 9

Original operatin instructions in German

▷ Wipe the top section with a damp cloth.

▷ Allow the container and accessories to dry

2 Before use

▶ When unpacking, check that the delivery is complete and that

there is no transport damage.

▶ Before using, the operators should be provided with information,

instructions and training for the use of the vacuum cleaner

and the substances that it is to be used for, including the safe

procedure for the removal of the gathered material.

3 Only use original accessories

See enclosed sheet.

Further accessories are given in the special acessories list or

upon request.

4 Fields of application

For wet and dry suction cleaning. Not suitable for vacuuming

health hazardous dusts. The suction cleaner with socket and ON/

OFF automatic switching system is intended for the connection of

electric tools.

5 Assembly

When unpacking, check that the appliance is complete and that

there is no transport damage.

5.1 Container ⑫.

Open the lock-in closures ⑭ of the 20-l and 32-l container, and

lift off the top section ①. Tip over the container and press in the

steering rollers with pivot ⑰ until they lock into place. Screw the

large wheels ⑮ onto the axles ⑯; see g. A.

The supplied steel axle ⑯ for the 45-l container is pushed through

the guide on the container, after which the wheels ⑮ and steering

rollers ⑰ are mounted as indicated in g. B.

The steering rollers ⑰ for appliances with 22-l, 35-l and 55-l

stainless steel containers with chassis crosshead are mounted as

indicated in g. C.

Insert suction tube VCF32/1200; VCF45/1400 ⑲ (when contai-

ned in scope of supply) into the container guide from above and

push down until it engages.

nsert suction tube VCF20/1000 ⑳ (when contained in scope of

supply) into the container guide from above and push down until it

engages.

5.2 Filters ⑧ - ⑪

Fitting the lters, depending upon the given model::

- Push the folded lter cartridge ⑩ in a straight manner over

the case ⑤, right up to the stop point, and lock the bayonet

mount ⑪; see g. D. The folded lter is suitable for wet and dry

suction cleaning.

- Foam lter

To suction the water, rst remove the folded lter; push the foam

lter ⑧ over the casing ⑤, see Fig. E

- Take hold of the paper lter bag ⑱ at the ang and push ver-

tically from above into the guide of the cyclone suction opening

⑬ until the stop point is reached. The bag must rest against the

container wall; see g. F.

For stainless steel containers, push the ange onto the suction

opening at the bottom rst and then at the top, then keep

pushing as far as it will go.

- The bag increases the dust retaining capacity and is

intended for hygienic disposal. Paper lter bags can only

be used for dry suction cleaning.

- Place the lter sack ⑨ in the container ⑫ respectively for

stainless steel containers slip over the edge of the container,

see g. G.

Remove the lter for wet suction cleaning.

5.3 Top section ①

From time to time, or when the suction force decreases, take out

the motor protection lter ⑦ for cleaning; see g. I. Place the top

section ① right-way-round on the container as indicated in g. H.

Observe the anti-rotation protection. The paper lter bag ⑱ must

not be damaged, and the lock-in closure ⑭ must engage securely.

5.4 Socket with ON/OFF automatic switching system

For suction cleaners with socket and ON/OFF automatic switching

system.

The socket ②e is intended for the connection of electrical tools. In

the “0“ switch setting, the socket can be used as an extension line

(e.g. for a light).

Connected load: Suction unit and appliance max. 16 A

WARNING! An electric tool must be switched off when it is connec-

ted. The socket is always live when the plug is inserted in a mains

socket, irrespective of the switch position

The suction openings of electric tools are not standard.

Consequently, an adapter (Rubber sleeve) 547275 is available that

can be shortened to t the given electric tool.

For other suction connections contact your dealer or the manufac-

turer of the given electric tool.

5.5 Filter cleaning

Appliances tted with an electromagnetic cleaning device can

remove the dust adhering to the folded lter ⑩ by vibration. This

ensures optimal use of the folded lter and extends the operating

cycles

VCF20/1000:

If the cleaner loses suction switch off the appliance (switch ②a on

position 0) and hold down the push button ②b for approx. 15 sec.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Felisatti VCF45 in the language / languages: English, German, French, Italian, Portuguese, Spanish, Finnish as an attachment in your email.

The manual is 2,28 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Felisatti VCF45 Manual

Product: