502495

Felisatti SCF165 Manual

5
Zoom out
Zoom in
Previous page
1/40
Next page
5
TECHNICAL DATA
Circular saws SCF165/1200 SCF190/1600S SCF210/1900S SCF210/1900VES
Input power W 1200 1600 1900 1900
No-load speed rpm 4700 4800 5000 2300-5000
Saw blade diameter mm 165 190 210 210
Max./min. saw blade diameter mm 165/160 190/180 210/200 210/200
Max./min. set width mm 2,5 2,5 2,5 2,5
Saw blade hole diameter mm 20 20 30 30
Depth of cut at 90° mm 55 63 75 75
Depth of cut at 45°
mm 37 42 51 51
Depth setting mm 0-55 0-63 0-75 0-75
Inclination setting 0-45° 0-45° 0-45° 0-45°
Approx. weight (w/o
accessories) according
EPTAProcedure 01/2003
Kg. 4,5 5,6 6,4 7,8
Follow very carefully the instructions in this manual, save it
and keep it close at hand, ready to carry out any inspection
of parts that may be necessary.
If the tool is used with care and normal maintenance is carried
out, it will work well for a long time.
The functions and use of the tool you have bought shall be
only those described in this manual. Any other use of the
tool is strictly forbidden.
ILLUSTRATIONS
DESCRIPTION (See gures)
A HM saw blade. (Fig. 1)
B Riving knife setting screw (Fig. 1)
C Mobile blade guard (Fig. 1)
D Saw blade setting disc (Fig. 1)
E Disc setting screw (Fig. 1)
F Riving knife (Fig. 1)
G Depth setting wing nut (Fig. 2)
H Lateral stop setting wing nut (Fig. 3)
I Lateral stop (Fig. 1)
J Safety push button switch (Fig. 2)
K On-/off switch (Fig. 2)
M Cutting line guide (Fig.3)
N Sawdust extraction (Fig. 1)
EQUIPMENT
- 1 lateral stop
- 1 disc clamping key
- Operating instructions
- Safety instructions
- Warranty
BRIEF DESCRIPTION
This tool is specially designed for straight sawing only of
boards made from wood and derivatives (plywood, chipboard
etc.).
BEFORE USING THIS TOOL
Before using the tool, make sure the mains voltage is correct:
it must be the same as that on the specication label.
Machines with 230V can also be connected to a 220V mains
supply.
Before plugging in the tool, always make sure the control
switch K works properly and returns to the OFF position
when released.
START UP
WARNING! Only plug in when machine is switched off.
Press the locking button J, and squeeze the trigger in the on/
off switch K. When the on/off switch is released, the machine
stops.
CONSTANT ELECTRONICS (SCF210/1900VES)
The built-in module permits:
- Soft start.
- The maintenance of a practically constant rated speed
up to rated power.
Overload protection
- The motor will stop if an overload occurs. The machine
should be immediately removed from the piece being worked
and allowed to operate off-load at maximum revolutions
during some thirty seconds in order to cool the motor.
FITTING THE DISC
WARNING! Always unplug the machine before carrying out
any work on it.
CAUTION: Do not use bent or cracked blades or high-speed
steel blades. Do not use saw blades that do not conform to
the specications contained in these instructions.
1. Move the mobile guard C backwards and hold it in
place.
2. To loosen or tighten the screw E with the key supplied with
the machine, secure the blade with the aid of a screwdriver
as follows: turn the blade guard to the side and turn the blade
until the hole lies under the saw shoe and insert a screwdriver
in the hole so that the blae does not move (or place the saw
on a piece of wood).
3. Loosen the screw E and remove the setting disc D.
4. Fit the saw blade and tighten with the setting disc D and
the screw E.
5. Before tting the new blade, make sure the surfaces in
contact with the setting discs are clean. The teeth of the saw
should protrude beyond the riving knife F. (The arrow printed
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Felisatti SCF165 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Felisatti SCF165 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info