502472
3
Zoom out
Zoom in
Previous page
1/32
Next page
3
MACHINE-SPECIFIC SAFETY WARNINGS
See “Safety Instructions” manual, supplied with this
instruction manual.
Warning! When drilling in amianthus/asbestos and/or
silica stone, the dust produced is extremely harmful to your
health. Wear protection against inhalation of this dust, in
compliance with current regulations on acci-dent prevention.
Follow the insurance company’s safety instructions regarding
the responsibility of em-ployees.
For your personal safety, always connect the machine
to a mains supply protected by a differential and ther-mal
cut-out switch, in accordance with regulations on low-voltage
wiring sitemaps.
Do not perforate the machine casing, as this would
destroy the protective insulation (use adhesive labels).
Always unplug the machine before doing any work on
it.
Warning! Before each use, inspect the plug and lead.
Should they need replacing, have this done by an of-cial
service centre. Only plug the machine in when it is switched
off.
Always keep the lead out of the machine’s working
area.
Only plug the machine in when it is switched off.
Do not allow the machine to get wet, nor should it be
used in wet environments.
When using the machine, always wear safety goggles,
gloves and non-slip footwear, and it is advisable to wear ear
protection.
Do not touch the bit during or immediately after work-
ing, as it becomes very hot and can cause serious burns.
Hold the machine rmly by the handle and the auxiliary
handle, otherwise the recoil produced could cause the
machine to work imprecisely or even dangerously.
Always use the auxiliary handle.
Never attempt to clean off dust or shavings resulting
from drilling when the machine is operating.
Do not use diamond core bits.
When drilling walls, ceilings or oors, take care to avoid
electric wires and gas or water pipes.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Felisatti RHF24 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Felisatti RHF24 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info