502512

Felisatti NTF305 Manual

6
Zoom out
Zoom in
Previous page
1/52
Next page
INTRODUCTION
Congratulations on your purchase of a new series
FELISATTI mitre saw, a high-quality product that will
complete your set of professional tools. This new
series represents the further evolution of the
renowned mitre saws developed by FELISATTI.
If any malfunctions ever occur during operation,
you will always be able to rely on the network of
authorised Assistance Centers. All FELISATTI
movable tools comply with Standard EN 61029,
Machine Directive 98/37/EC and amendments,
with 2006/95/EC and 93/68/EEC, and in regard to
electromagnetic compatibility, with Directive 89/336/
EEC, EN 55014.1, EN 55014.2, EN61000.3.2 and EN
61000.3.3 and EN 50366.
If used with the care and serviced regularly, this tool
will provide long-lasting and reliable service. Carefully
follow the instructions contained in this manual, using
them for reference for any eventual controls that may
need to be carried out.
1 GENERAL INFORMATION
1.1 THE AIM OF THIS MANUAL
This manual has been prepared by the Manufacturer
as an integral part of the mitre saw equipment. The
information contained is for the benet of professional
operators. This manual denes the purpose for which
the mitre saw was designed, and contains all the
information necessary to ensure safe and correct
use. We therefore recommend reading the manual
carefully before proceeding to any form of adjustment,
operation or maintenance. Constant respect for the
contents of this manual ensures both machine and
operator safety and the most economical and longest
working life of the machine itself. Photographs and
drawings have been supplied by the manufacturer for
exemplifying purposes; with the aim of following
a policy of constant development and product
modernisation, the manufacturer is entitled to make
modications without forewarning.
1.2 MITRE SAW IDENTIFICATION
Plate A (g. 1) provides mitre saw model information
and technical data of the motor and of its manufacturer;
Plate B provides mitre saw model identication.
1.2.1 IDENTIFICATION (g. 1)
A Data plate
B Logotype plate
C Upper table
D Movable upper casing
E Handgrip
F Machine lock pin
G Lower support stroke-end raised section
H Turntable
I Fixed casing
J Blade
K Machine lock knob 0°- 45°
L Turntable lock knob
M Movable lower blade protector
N Upper table ne adjustment
O Release lever
P Base
Q Support
R Main body
S Upper table locking knob
1.3 MANUFACTURER – IDENTIFICATION
Interskol Power Tools S.L.
Carretera de Sant Joan de les Abadesses s/n17500
RIPOL, (Girona), SPAIN
Tel +34972700200 - Fax +34972700554E-mail:
e-mail: felisatti@interskol.es
2 TECHNICAL CHARACTERISTICS
A sturdy, high-reliability structure ensures that these
mitre saws will be able to cut wooden boards and
PVC and aluminium pipe in industrial environments
at no expense to the machine essential handiness
or portability. All models are equipped with spacious
upper tables that permit the mitre saw to be easily
transformed into a disk saw to perform cuts of up to
40 mm thickness, engraving, facing, and trimming.
Only one operator is required for the use of the mitre
saw, which has been designed and constructed in
compliance with Standard EN 61029. All models are
equipped with release switches featuring LOCK in
‘ON’ buttons. All models come with minimum voltage
circuits that prevent the accidental restarting of the
machine after interruptions in power supply because
in such cases the operator is always required to reset
work conditions; a high-power and high-efciency
asynchronous motor ensures silent operation at all
rpm levels. The machine also comes with a motor
brake that permits the blade to be stopped within 10
seconds of the release of the button on the switch.
… 6 …


Need help? Post your question in this forum.

Forumrules
1

Forum

felisatti-ntf305

Reset search

  • Hello,
    we need some parts of FELISATTI MT305S:
    - M Movable lower blade protector
    - K Machine lock knob 0°- 45°
    - L Turntable lock knob
    - S Upper table locking knob

    Where I can find these parts?
    I asked to some supplier but I didnt found them.
    Thank you Submitted on 22-6-2023 at 16:31

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Felisatti NTF305 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Felisatti NTF305 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 2,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info