502477

Felisatti HF12.5 Manual

4
Zoom out
Zoom in
Previous page
1/24
Next page
4 - GB
those recommended in the instruction manual, may present
a risk of personal injury. Wheel intended for larger power tool
is not suitable for the higher speed of a smaller tool and may
burst.
Check before Use
1. Connection to Power Supply
2. Extension Cord
Use an extension cord if the
distance to the power source
requires its use. Extension cord
must be of appropriate thickness
and length for the supply of
electric current. Too thin or too long cord will cause voltage to
drop reducing the motor power. Use it as short as possible.
If the cord is damaged, have it repaired or replaced at A/S
center immediately.
3. Maintenance and Checking of Work Area
Work area must be checked using CAUTIONs in this manual
to ensure it provides appropriate environment.
4. Power Supply Check
Make sure that the power supply complies the requirements
described in the name plate on the Electric Hammer Drill.
5. Switch Status Check
if the power plug is connected when the power switch is
in ON position, sudden rotation of the moving parts of the
Electric Hammer Drill may cause accident.
Check if the switch lever returns to its original position when
it is pushed and pulled.
An explanation of any symbols or pictograms marked on
the tool relevant to safe use;
Technical Data and List of Contents
1. Technical Data
parameter HF12,5/1050
Rated Voltage, V~ 230
Rated frequency, Hz 50
Motor Protection-type Single-
phase Commutator
Rated Input , W 1050
No-load speed(bpm), /min 3500
Impact Energy, J 12,5
Weight (Without cord, side
handle), kg
5,4
Protection Class II
Tool holder system SDS Max
Typical A-weighted sound power
level(LWA), dB(A)
100
Typical A-weighted emission
sound pressure level(LPA),
dB(A)
89
Triaxial vibration value:chiseling
(ah)(vibration vector sum), m/сІ
11,5
2. List of Contents
Plastic Box
Grease tube
Instruction Manual
1. Description of Functions
The overall look of the machine shown in Fig.1.
1 – Retainer SDS-max®
2 - Selector
3 - Jacket
4 - Crank Case Cover(B)
5 - Grease Cover
6 - Crank Case Cover(A)
7 - Switch
8 - Handle
9 - End Cover
10 - Housing
11 - Gear Cover
12 - Crank Case
13 - Сap
2. Applications
Demolition of concrete Ramming, grooving, cutting, detach-
ing, angle forming, grooving on pebble road [Examples of ap-
plication] Cooling/heating constructions, piping/wiring works,
sanitary equipment installations, installation of machineries,
water supply/sewage works, interior works, port facilities
engineering, other engineering, equipment installation and
repair works.
Mounting/Dismounting of Tools and Operating Method
1. Mounting / Dismounting the Tools (Fig.2)
To mount the tool, push the tool in while pushing the retainer
backward in the direction of the arrow. To dismount, pull out
the tool while pushing the retainer again backward in the di-
rection of the arrow.
2. Mounting the Jacket (Fig.3)
The Jacket of both HF12,5/1050 Hammers can be mounted
by turning it 180°. Mount it the way user feels most comfort-
able.
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Felisatti HF12.5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Felisatti HF12.5 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 1,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info