Manual Fein WSS14 125T (page 7 of 85) (English, French, Spanish)

502069

Zoom out

Zoom in

1/85

Safety warnings specific for sanding

operations

Do not use excessively oversized sanding disc

paper. Follow manufacturers recommenda-

tions, when selecting sanding paper.

Larger

sanding paper extending beyond the sanding

pad presents a laceration hazard and may

cause snagging, tearing of the disc, or kick-

back.

Safety warnings specific for wire

brushing operations

Be aware that wire bristles are thrown by the

brush even during ordinary operation. Do not

overstress the wires by applying excessive load

to the brush.

The wire bristles can easily pen-

etrate light clothing and/or skin.

If the use of a guard is recommended for wire

brushing, do not allow any interference of the

wire wheel or brush with the guard.

Wire

wheel or brush may expand in diameter due

to work load and centrifugal forces.

Additional safety warnings

Use elastic spacers/liners when these are pro-

vided with the grinding accessory.

Make absolutely sure that the accessory is

mounted in accordance with the manufac-

turer’s instructions. The mounted accessory

must be able to rotate freely.

Incorrectly

mounted accessories can loosen during oper-

ation and fly off.

Handle accessories carefully and store them

according to the manufacturer’s instructions.

Damaged accessories can form cracks and

break off during operation.

When using application tools with a threaded

insert, take care that the thread in the applica-

tion tool is long enough to hold the spindle

length of the power tool. The thread in the

application tool must match the thread on the

spindle.

Incorrectly mounted application tools

can loosen during operation and cause inju-

ries.

Do not machine any material containing asbes-

tos.

Asbestos is carcinogenic.

Beware of any concealed electric cables, gas or

water conduits;

check the working area with a

metal detector, for example, before com-

mencing work.

Use a stationary extraction system, blow out

ventilation slots frequently and connect a

residual current device (RCD) on the line side.

When working metal under extreme operat-

ing conditions, it is possible for conductive

dust to settle in the interior of the power

tool. The total insulation of the power tool

can be impaired.

This double-insulated power tool is equipped

with a polarized plug (one contact is wider than

the other). The plug will only fit into the polar-

ized socket outlet in one position. Turn the plug

if it does not fit completely into the socket out-

let. If the plug still does not fit, have a qualified

electrician install a polarized socket outlet. Do

not modify or alter the plug under any circum-

stances.

Double-insulated power tools nei-

ther require a three-core power cable nor a

power connection with ground contact.

Operate the power tool only off of power sup-

plies whose voltage and frequency values cor-

respond with the values on the type plate of the

power tool.

When operating the power tool in a damp envi-

ronment, it must be connected via a ground-

fault circuit interrupter (g.f.c.i.).

Using special

rubber protective gloves and footwear

increase your own safety.

Use clamps or another practical way to secure

and support the workpiece to a stable platform.

Holding the work by hand or against your

body leaves it unstable and may lead to loss of

control.

Before mounting or replacing application tools

or accessories, pull the power plug.

This pre-

ventive safety measure rules out the danger of

injuries through accidental starting of the

power tool.

Use appropriate detectors to determine if utility

lines are hidden in the work area or call the

local utility company for assistance.

Contact

with electric lines can lead to fire and electric

3 41 01 121 21 0.book Seite 7 Mittwoch, 20. Mai 2009 2:23 14

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fein WSS14 125T in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 8,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fein WSS14 125T Manual

Product: