Manual Fein WSG14 125T (page 6 of 85) (English, French, Spanish)

502066

Zoom out

Zoom in

1/85

Maintain a firm grip on the power tool and posi-

tion your body and arm to allow you to resist

kickback forces. Always use auxiliary handle, if

provided, for maximum control over kickback

or torque reaction during start-up.

The opera-

tor can control torque reactions or kickback

forces, if proper precautions are taken.

Never place your hand near the rotating acces-

sory.

Accessory may kickback over your

hand.

Do not position your body in the area where

power tool will move if kickback occurs.

Kick-

back will propel the tool in direction opposite

to the wheel’s movement at the point of snag-

ging.

Use special care when working corners, sharp

edges, etc. Avoid bouncing and snagging the

accessory.

Corners, sharp edges or bouncing

have a tendency to snag the rotating acces-

sory and cause loss of control or kickback.

Do not attach a saw chain woodcarving blade

or toothed saw blade.

Such blades create fre-

quent kickback and loss of control over the

power tool.

Additional safety instructions for

grinding and cutting off operations

Use only wheel types that are recommended for

your power tool and the specific guard

designed for the selected wheel.

Wheels for

which the power tool was not designed can-

not be adequately guarded and are unsafe.

The guard must be securely attached to the

power tool and positioned for maximum safety,

so the least amount of wheel is exposed

towards the operator.

The guard helps to pro-

tect operator from broken wheel fragments

and accidental contact with wheel.

Wheels must be used only for recommended

applications. For example: do not grind with the

side of cut-off wheel.

Abrasive cut-off wheels

are intended for peripheral grinding, side

forces applied to these wheels may cause

them to shatter.

Always use undamaged wheel flanges that are

of correct size and shape for your selected

wheel.

Proper wheel flanges support the

wheel thus reducing the possibility of wheel

breakage. Flanges for cut-off wheels may be

different from grinding wheel flanges.

Do not use worn down wheels from larger

power tools.

Wheels intended for larger

power tools are not suitable for the higher

speed of a smaller tool and may burst.

Additional safety warnings specific for

abrasive cutting off operations

Do not “jam” the cut-off wheel or apply exces-

sive pressure. Do not attempt to make an

excessive depth of cut.

Overstressing the

wheel increases the loading and susceptibility

to twisting or binding of the wheel in the cut

and the possibility of kickback or wheel

breakage.

Do not position your body in line with and

behind the rotating wheel.

When the wheel, at

the point of operation, is moving away from

your body, the possible kickback may propel

the spinning wheel and the power tool

directly at you.

When wheel is binding or when interrupting a

cut for any reason, switch off the power tool

and hold the power tool motionless until the

wheel comes to a complete stop. Never attempt

to remove the cut-off wheel from the cut while

the wheel is in motion otherwise kickback may

occur.

Investigate and take corrective action

to eliminate the cause of wheel binding.

Do not restart the cutting operation in the

workpiece. Let the wheel reach full speed and

carefully reenter the cut.

The wheel may bind,

walk up or kickback if the power tool is

restarted in the workpiece.

Support panels or any oversized workpiece to

minimize the risk of wheel pinching and kick-

back.

Large workpieces tend to sag under

their own weight. Supports must be placed

under the workpiece near the line of cut and

near the edge of the workpiece on both sides

of the wheel.

Use extra caution when making a “pocket cut”

into existing walls or other blind areas.

The

protruding wheel may cut gas or water pipes,

electrical wiring or objects that can cause

kickback.

3 41 01 121 21 0.book Seite 6 Mittwoch, 20. Mai 2009 2:23 14

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fein WSG14 125T in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 8,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fein WSG14 125T Manual

Product: