Manual Fein GSZ11-320PERL (page 22 of 200) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

577140

Zoom out

Zoom in

1/200

Wear personal protective equipment. Depending on appli-

cation, use face shield, safety goggles or safety glasses.

Where appropriate, wear dust mask, hearing protectors,

gloves and workshop apron capable of stopping small

abrasive or workpiece fragments. The eye protection

must be capable of stopping flying debris generated by

various operations. The dust mask or respirator must be

capable of filtrating particles generated by your opera-

tion. Prolonged exposure to high intensity noise may

cause hearing loss.

Keep bystanders a safe distance away from work area.

Anyone entering the work area must wear personal pro-

tective equipment. Fragments of workpiece or of a bro-

ken accessory may fly away and cause injury beyond

immediate area of operation.

Hold the power tool by insulated gripping surfaces only,

when performing an operation where the cutting acces-

sory may contact hidden wiring or its own cord. Cutting

accessory contacting a “live” wire may make exposed

metal parts of the power tool “live” and could give the

operator an electric shock.

Always hold the power tool firmly when starting it. The

reaction torque of the motor, as it accelerates to full

speed, can cause the power tool to twist.

If possible, use clamps to fasten or affix the workpiece.

Never hold a small workpiece in one hand and the power

tool in the other hand while in use. Clamping small work-

pieces allows you to use both hands for better control

the power tool. Round material such as dowel rods, pipes

or tubing have a tendency to roll away while being cut,

and may cause the application tool to jam or bind and be

thrown toward you.

Keep the connection cable away from rotating application

tools. When losing control over the machine, the mains

cable can be cut through or get caught, and your hand or

arm can come in contact with the rotating application

tool.

Never lay the power tool down until the accessory has

come to a complete stop. The spinning accessory may

grab the surface and pull the power tool out of your con-

trol.

After changing application tools or making adjustments

on the tool, tighten the collet nut, chuck or any other fas-

tening elements. Loose fastening elements can unexpect-

edly misadjust and lead to loss of control; unfastened,

rotating components will be violently thrown.

Do not run the power tool while carrying it at your side.

Accidental contact with the spinning accessory could snag

your clothing, pulling the accessory into your body.

Regularly clean the power tool’s air vents. The motor’s

fan will draw the dust inside the housing and excessive

accumulation of powdered metal may cause electrical

hazards.

Do not operate the power tool near flammable materials.

Sparks could ignite these materials.

Do not use accessories that require liquid coolants. Using

water or other liquid coolants may result in electrocution

or shock.

Further safety warnings for all applications

Kickback and related warnings

Kickback is the sudden reaction to a pinched or snagged

rotating application tool, such as a grinding wheel, sand-

ing belt, wire brush, etc. Pinching or snagging causes the

rotating application tool to rapidly stop. This causes an

uncontrolled power tool to be forced in the direction

opposite of the application tool’s rotation direction.

For example, if a grinding wheel is snagged or pinched in

the workpiece, the edge of the grinding wheel that is

entering into the workpiece can be caught, causing the

grinding wheel to break out or cause kickback. The grind-

ing wheel may either jump toward or away from the

operator, depending on the direction of the wheel at the

point of blocking. Grinding wheels can also break under

these conditions.

Kickback is the result of power tool misuse or incorrect

operating procedures. It can be avoided by taking proper

precautions as described below.

Maintain a firm grip on the power tool and position your

body and arms to allow you to resist kickback forces. The

operator can control torque reactions or kickback forces,

if proper precautions are taken.

Use special care when working corners, sharp edges, etc.

Avoid bouncing and snagging the accessory. Corners,

sharp edges or bouncing have a tendency to snag the

rotating accessory and cause loss of control or kickback.

Do not use toothed saw blades. Such application tools

create frequent kickback or loss of control over the

power tool.

Always feed the application tool into the material in the

same direction as the cutting edge is exiting from the

material (which is the same direction as the chips are

thrown). Guiding the power tool in the wrong direction

causes the cutting edge of the application tool to climb

out of the workpiece and pull the tool in the direction of

this feed.

Always clamp the workpiece when using rotating files,

cutting discs, carbide (TC) or high-speed grinding tools.

These application tools will pinch or grab if they become

slightly canted in the groove, and can kickback. When a

cutting disc grabs, the disc itself usually breaks. When

rotating files, carbide (TC) or high-speed grinding tools

pinch or grab, the tool insert may jump from the groove

and you could lose control of the tool.

Never place your hand near the rotating accessory.

Accessory may kickback over your hand.

Do not position your body in the area where power tool

will move if kickback occurs. Kickback will propel the

tool in direction opposite to the wheel’s movement at

the point of snagging.

OBJ_BUCH-0000000167-001.book Page 22 Tuesday, January 27, 2015 9:01 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fein GSZ11-320PERL in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 11,82 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fein GSZ11-320PERL Manual

Product: