Manual Fein FMM 250 (page 13 of 44) (English, French, Spanish)

78185

Zoom out

Zoom in

1/44

MULTIMASTER FMM 250 / MULTIMASTER FMM 250 Q

MULTIMASTER FMM 250 (Figure 4).

Before mounting or replacing

application tools or accesso-

ries, pull the power plug. This preventive

safety measure rules out the danger of inju-

ries through accidental starting of the

power tool.

For all work or when chang-

ing application tools, always

wear protective gloves. Danger of injury

from the sharp edges of the application

tools. Application tools can become very

hot while working. Danger of burns!

➤ Unscrew the clamping screw.

➤ Clean the tool holder, the applica-

tion tool and the clamping screw.

➤ Place the application tool exactly

onto the star-shaped tool holder. Pay

attention that the application tool has a

flush fit.

➤ Tighten the clamping screw using

the supplied Allen key.

Attaching/replacing the sanding sheet (Figure 5).

➤ Align the sanding sheet and press it

onto the sanding plate by hand.

➤ Firmly press the power tool with the

sanding sheet against a flat surface and

briefly switch the power tool on. This

provides for good adhesion and pre-

vents premature wear.

The sanding sheet can be pulled off again

and then remounted offset by 120° when

only one tip of the sanding sheet is worn.

WARNING

CAUTION

Clamping screw

Allen key

Tool holder

Fig. 4

Sanding pad

Sanding sheet

Fig. 5

3 41 01 091 21 0.book Seite 13 Dienstag, 24. Juli 2007 3:32 15

Downloaded from www.Manualslib.com manuals search engine

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fein FMM 250 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 2,97 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fein FMM 250

Fein FMM 250 User Manual - German, Dutch, Danish, Italian, Polish, Portuguese, Swedish, Norwegian - 107 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fein FMM 250 Manual

Product: