Manual Fein AStxe649 1 (page 14 of 68) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

502864

Zoom out

Zoom in

1/68

Using the recommended clamping devices.

Clamping device 9 07 02 001 00 1

For pipes with a diameter of up to 150 mm use clamping

device 9 07 02 001 00 1.

– Position the clamping chain (14) around the work

piece and insert the hooks of fish plate (7) in the

clamping chain (14).

– Tension the chain using gripping arm (6).

– Mount the pneumatic tool onto the supporting

bolt (20) (see “Mounting the clamping device”).

The clamping head (19) can be adjusted to the sawing

cuts and can be pivoted.

Clamping device 9 07 02 004 00 6

For large pipes with a diameter of 150 mm to 325 mm

use the clamping device 9 07 02 004 00 6 and saw blades

with a length of 500 mm or 600 mm and a thickness of

2 mm. Using the chain extension, larger pipes can also be

machined with a diameter of 440 mm.

Saw-blade guide 9 06 06 002 00 9

For operations using a saw blade with a thickness of

1.6 mm and a length of 530 mm use the saw-blade guide

9 06 06 002 00 9.

– With the auxiliary handle removed, fasten the saw-

blade guide at the drill hole on the gear head of the

power tool.

Clamping device 9 07 02 003 00 8

For machining profiled sections with a width of 290 mm

and a height of 550 mm, use clamping device

9 07 02 003 00 8. The design is equivalent to that of a

parallel vise. The clamping jaws (10+11) and the clamp-

ing head (19) are adjustable.

Clamping device 9 07 02 005 00 0 (without figure)

For cutting pipes and round materials with an external

diameter of 80 mm to 400 mm, use the clamping/feeding

device 9 07 02 005 00 0 as a guide for the hacksaw. By

means of a slipping coupling, the pressing-on time of the

saw blade is limited and thus the service life is longer. For

handling, see the Instruction Manual 3 41 00 898 06 6.

Free hand rest 3 27 14 062 02 3

For sawing materials such as corrugated metal, for exam-

ple, use the free hand rest 3 27 14 062 02 3. Disconnect

the auxiliary handle and fasten the free hand rest to the

stroke mechanism and in the drill hole on the top of the

gear head.

Repair and customer service.

Blow out the interior of the power tool at

regular intervals from outside through the air

vents with dry, compressed air.

If the supply cord of this power tool is damaged it must

be replaced by a specially prepared cord available

through the FEIN customer service centre.

If required, you can change the following parts yourself:

Application tools, auxiliary handle

Warranty and liability.

The warranty for the product is valid in accordance with

the legal regulations in the country where it is marketed.

In addition, FEIN also provides a guarantee in accordance

with the FEIN manufacturer’s warranty declaration.

Only part of the accessories described or shown in this

instruction manual will be included with your power

tool.

Declaration of conformity.

FEIN declares itself solely responsible for this product

conforming with the documents and standards given on

the last page of this Instruction Manual.

Environmental protection, disposal.

Packaging, worn out power tools and accessories should

be sorted for environment-friendly recycling.

3 41 01 081 06 0.book Seite 14 Freitag, 1. August 2008 8:37 08

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fein AStxe649 1 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,42 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fein AStxe649 1 Manual

Product: