Manual Fein ast 638 (page 13 of 61) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

383669

Zoom out

Zoom in

1/61

For your safety.

Read all safety warnings and all instruc-

tions. Failure to follow the warnings

and instructions may result in electric

shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

Do not use this power tool before you have thor-

oughly read and completely understood this

Instruction Manual and the enclosed “General

Safety Instructions” (document number

3 41 30 054 06 1). The documents mentioned should be

kept for later use and enclosed with the power tool,

should it be passed on or sold.

Please also observe the relevant national industrial safety

regulations.

Special safety instructions.

Hold power tool by insulated gripping surfaces, when per-

forming an operation where the cutting accessory may con-

tact hidden wiring or its own cord. Cutting accessory

contacting a “live” wire will make exposed metal parts of

the power tool ‘“live” and shock the operator.

Keep your hands well away from the saw blade. Do not

place your hands in front of or underneath the saw blade.

Any contact with the saw blade can cause personal inju-

ries. The saw blade can become very hot during the saw-

ing process.

Wear personal protective equipment. Depending on the

application, use a face shield, safety goggles or safety

glasses. Wear ear protection. The safety glasses must be

capable of protecting against flying particles generated by

the various different operations. Prolonged exposure to

high intensity noise may cause loss of hearing.

Secure the workpiece firmly. A work piece that is gripped

tightly in a clamping device or vice, is more secure than if

held by hand.

Do not rivet or screw any name-plates or signs onto the

power tool. If the insulation is damaged, protection against

an electric shock will be ineffective. Adhesive labels are

recommended.

Do not use accessories which are not specifically designed

and recommended by the tool manufacturer. Just because

the accessory can be attached to your power tool, it does

not assure safe operation.

Clean the ventilation openings on the power tool at regular

intervals using non-metal tools. The blower of the motor

draws dust into the housing. An excessive accumulation

of metallic dust can cause an electrical hazard.

Before putting into operation, check the mains connection

and the mains plug for damage.

Intended use of the power tool:

hand-guided jigsaw for commercial use for cutting metal,

sandwich materials, plastics and wood in weather-pro-

tected environments using the application tools and

accessories recommended by FEIN.

Operating instructions.

Guide the power tool toward the work piece only

when switched on.

Guide the power tool uniformly and with light feed in the

cutting direction. Excessive feed reduces the tool life of

the application tools.

ASte638:

Stroke adjustment:

low stroke for working metal and plastics,

high stroke for working wood.

To increase the tool life of the saw blade when sawing

metal, it is recommended to apply a lubricating agent

alongside the intended cutting line:

– for cuts in steel sheet: Cutting oil,

– for cuts in aluminium: Petroleum.

Character Unit of measure,

international

Unit of measure,

national

Explanation

/min spm Stroke rate at no-load

W W Power input

W W Output

M… mm mm Size of metric thread

dB dB Sound power level

dB dB Sound pressure level

K… Uncertainty

m/s

Acceleration

m, s, kg, A, mm, V,

W, Hz, N, °C, dB,

/min, m/s

m, s, kg, A, mm, V,

W, Hz, N, °C, dB,

rpm, m/s

Basic and derived units of measure from the inter-

national system of units SI.

WARNING

3 41 00 910 06 9.book Seite 13 Montag, 23. Juni 2008 11:56 11

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fein ast 638 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,78 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fein ast 638 Manual

Product: