Manual Fein ASM14-6 PC (page 15 of 135) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

576094

Zoom out

Zoom in

1/135

The declared vibration emission level represents the

main applications of the tool. However, if the tool is used

for different applications, with different accessories or

poorly maintained, the vibration emission may differ.

This may significantly increase the exposure level over

the total working period.

An estimation of the level of exposure to vibration

should also take into account the times when the tool is

switched off or when it is running but not actually doing

the job. This may significantly reduce the exposure level

over the total working period.

Identify additional safety measures to protect the opera-

tor from the effects of vibration such as: maintain the tool

and the accessories, keep the hands warm, organisation

of work patterns.

Operating Instructions.

The power tool is equipped with a soft-starting feature.

If the motor switches off after a proper screwdriving

operation, restarting is not possible until after 0.8 sec-

onds. This prevents accidental retightening of already

tightened screws.

Handling the battery.

Operate and charge the battery only within the battery

operating-temperature range of 0°C – 45°C (32°F –

113°F). At the beginning of the charging procedure, the

battery temperature must be within the battery operat-

ing-temperature range.

The real percentage of the battery charge condition is

only indicated when the power tool motor is stopped.

The electronics automatically switch off the motor prior

to the battery being deep discharged.

Selecting the rotation direction (see page 7).

A short beep sounds when actuating the rotational direc-

tion switch.

In left-hand running mode, both LED indicators

(red/green) flash.

The selected rotation direction is maintained until actuat-

ing the rotational direction switch again.

Changing the battery does not effect a change of the rota-

tion direction.

Meaning of the LED indicators and the beeps of the

power tool (see page 3).

Green LED indicator lit.

The screwdriving operation has been carried out prop-

erly. The preset torque has been reached.

Red LED indicator lit and a short beep.

The screwdriving operation has not been carried out

properly. The preset torque has not been reached. The

screwdriving operation must be carried out once more.

Red LED indicator lit and no beep.

The rotational direction switch or the On/Off switch

were pressed while sliding on the battery. Release the

switches again. When the red LED indicator goes out, the

machine is ready for operation again.

When the red LED indicator does not go out, either a

memory error is given or the On/Off switch is defective.

The electronic system is defective and must be replaced

by the after-sales service.

Red LED indicator flashes (1 time per second).

The battery is discharged (empty) and must be replaced.

The machine is blocked and will not be ready for opera-

tion until after being voltage-free for approx. 10 seconds.

Red LED indicator flashes (2 times per second).

The machine is overheated, the over-temperature pro-

tection has responded. After cooling down, the machine

is ready for operation again. If the over-temperature pro-

tection responds several times briefly after each other,

have the power tool checked by the after-sales service.

Brief lighting up of both LEDs.

The cordless screwdriver switches to the Energy Saving

Mode.

Parameter assignment

Differing to the existing standard programs, the parame-

ters of the AccuTec screwdrivers can be freely assigned

in some ranges. To realize these special solutions, an

additional PC program is required for assignment of the

parameters. This program is on the included USB card of

the separately available USB programming adapter. After-

wards, the data can be transferred to the screwdriver

with the programming adapter. The current software can

be downloaded from FEIN via the Internet under

www.fein.com. It can be found in the country-specific

AccuTec sector.

Repair and customer service.

When working metal under extreme operat-

ing conditions, it is possible for conductive

dust to settle in the interior of the power tool.

Blow out the interior of the power tool via the ventila-

tion slots frequently with dry and oil-free compressed air.

After 500 000 screwdriving operations, the gearing is to

be relubricated with grease at the motor pinion and at the

bearing axis of the planetary gears (grease

32160014230).

The current spare parts list for this power tool can be

found in the Internet at www.fein.com.

If required, you can change the following parts yourself:

application tools, battery

Warranty and liability.

The warranty for the product is valid in accordance with

the legal regulations in the country where it is marketed.

In addition, FEIN also provides a guarantee in accordance

with the FEIN manufacturer’s warranty declaration.

LED indicator Meaning Activity

1 – 4 green

LED

Percentage of

charge condi-

tion

Operation

Continuous

red light

Battery is

almost empty

Charge battery

Red flashing

light

Battery is not

ready for

operation

Bring the battery into

the battery operating-

temperature range,

then charge

OBJ_BUCH-0000000120-001.book Page 15 Wednesday, June 5, 2013 10:00 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fein ASM14-6 PC in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7,89 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fein ASM14-6 PC Manual

Product: