576087

Fein ASbe 642 Manual

13
Zoom out
Zoom in
Previous page
1/53
Next page
13
EN
Instruction manual for drive impact wrench.
Symbols, abbreviations and terms used.
Symbol, character Explanation
Do not touch the rotating parts of the power tool.
Be absolutely sure to read the enclosed documentation such as the Instruction Manual and the
General Safety Instructions.
Before commencing this working step, pull the mains plug out of the socket. Otherwise there
will be danger of injury if the power tool should start unintentionally.
Use eye-protection during operation.
Use ear protection during operation.
Confirms the conformity of the power tool with the directives of the European Community.
Worn out power tools and other electrotechnical and electrical products should be sorted
separately for environment-friendly recycling.
Product with double or reinforced insulation
Ø
Diameter of a round part
Tool holder: External square drive
Screw diameter
Weight according to EPTA-Procedure 01/2003
Screws/bolts with normal tensile strength
Screws/bolts with high tensile strength
Impact duration
Torque adjustment via speed steps
Torque gradient for applications with hard backing, e. g., screws with nuts and washers
Torque gradient for resilient applications, e. g., wheel rims, spring washers, stud bolts, exten-
sions
Torque gradient for applications with soft backing, e.g., wood, lead or fibre discs, packings
Character Unit of measure,
international
Unit of measure,
national
Explanation
P
1
W W Power input (intermittent periodic use 2/8 min.)
P
2
W W Output
n
0
/min rpm No-load speed
n
S
/min rpm Impact rate (impact, oscillations, etc.)
Nm Nm Torque
M… mm mm Size of metric thread
L
wA
dB dB Sound power level
L
pA
dB dB Sound pressure level
K… Uncertainty
m/s
2
m/s
2
Acceleration
m, s, kg, A, mm, V,
W, Hz, N, °C, dB,
/min, m/s
2
m, s, kg, A, mm, V,
W, Hz, N, °C, dB,
/min, m/s
2
Basic and derived units of measure from the inter-
national system of units
SI
.
t
3 41 01 096 06 0.book Seite 13 Donnerstag, 5. Juli 2007 8:46 08
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fein ASbe 642 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fein ASbe 642 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info