Manual Faytech 8 IP65 Touch (page 52 of 65) (English, German)

592243

Zoom out

Zoom in

1/65

The Clear and Calibrate button will clear all calibration and linearization settings. It will then

automatically take you through a 4 Points Calibration.

The Linearization ( 25 or 9 points calibration ) function is used to compensate the touch screen

linearity. It will require you to press and hold on 9 or 25 targets on the screen so it can

compensate for the curvature (if any) of the display. After linearization is completed, the

linearity of the touch screen will be shown in the Linearity curve window.

The Draw Test function is used for accuracy and performance checking. Press this button and

a new pop up window will be popped up on the monitor (see below). Touch or drag your touch

pen or finger on this grid to gauge the effectiveness of the settings and calibrations that you

have made. If you are using your finger, you may have to press firmly to draw continuous lines.

Press the Clear button to clear the window. Press the Quit button to terminate this draw test.

4. Display-Multi-Monitor Setting tab:

If you selected “Support Multi-Monitor System” when you installed the Touch driver, you will

see a Display tab when you run the Touchkit Configure utility. If you did not select this option,

you will not see a Display tab.

You can have up to four faytech touch-screens connected simultaneously. You can also use a

(non-touch) display and a touch screen. In the example below, the touch-screen is display "1",

while the second display "2" is a normal monitor. Both have the same resolution, but the touch

screen is the primary monitor.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Faytech 8 IP65 Touch in the language / languages: English, German as an attachment in your email.

The manual is 2,52 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Faytech 8 IP65 Touch Manual

Product: