592241
46
Zoom out
Zoom in
Previous page
1/60
Next page
46
On the context menu, if you select the
option Display Button, you will see a
mouse animation displayed in the lower
right half of the screen. The red mark
indicates which mouse button will be
simulated the next time you touch the
screen. By clicking on the left or right
pointer of the animation you change the
behavior of the touch panel accordingly.
TROUBLESHOOTING
If you are having trouble getting your
touch monitor to work correctly, please
look through this list of common
problems:
PHYSICAL SETUP:
Cable connections. Care should be
taken when connecting the cables.
Make sure the cables are connected to
the right connectors at each end and
make sure the cables are attached firmly
to their respective connectors. Lack of
an image or poor quality images are
often caused by the wrong connection.
Turn off the display and check each pin
of the cable separately. If you think you
have a defective cable, we are happy to
exchange it for you - you do not have to
send the display back.
Avoid short circuits! Please be careful
before connecting power to the display
that there are no cables that have not
yet been connected at both ends. If the
monitor does not power up, try another
outlet or another power source.
Provide the display with a 12V DC
power supply only. Higher or lower
voltage can permanently damage the
display and is not covered under
warranty. Also take care that you do not
mix polarity (+ is on the inner pole!).
STARTUP:
Please note: When you press the Power
button, the display will look for the right
VGA-signal in order to receive a picture.
If there is no signal source connected,
the display will go off automatically after
a short period of time.
Display remains black
Connection error: Please check again
to make sure that all cables are properly
connected.
Resolution / activation errors: Using
the right resolution and activating the
display is a common problem that is
often not the fault of the display itself.
The monitor supports the resolutions
given in the technical data. Sometimes
during simultaneous operation of two
displays on a PC or the connection of an
additional display to a notebook
complications can arise. Usually these
problems need to be resolved in the
hardware and software of the PC. It is
always best to use the display initially as
a single display with the original panel
resolution (see technical specification).
Try to start with this resolution then
experiment with other resolutions and
other combinations of displays to see
which work best for you.
Please note that extended desktops
often are black in the beginning. In this
situation your display may be black at
first if you configure it as an extended
desktop.
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Faytech 22 Touch at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Faytech 22 Touch in the language / languages: English, German as an attachment in your email.

The manual is 1,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info