Manual Faytech 10 IP65 Touch (page 54 of 65) (English, German)

592244

Zoom out

Zoom in

1/65

On this tab you can finely adjust the touch area. This is very useful when you have problems

touching at the edges of the touch screen. In the following image you can see that the limits for

all edges of the screen were corrected (to 110%). E.g. if you have problems in the upper right

area, just increase the upper and right limit (>> Bigger ). Confirm the change and try the new

settings with the Draw Test. You can also use the X-axis and Y-axis displacement options to

compensate if your touch always seems to be off the same amount in the X and/or Y

directions.

The "Support Edge Compensation" option optimizes the touch detection in the corners of

your faytech touch panels. This option should always be enabled.

6. Hardware and About tabs:

The last two tabs are for information only - there are no options to select on these tabs.

The Hardware tab gives information about the design of the faytech touch display and the

firmware used.

The About tab gives information about the touch driver version as well as information about

the developer of the software.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Faytech 10 IP65 Touch in the language / languages: English, German as an attachment in your email.

The manual is 2,52 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Faytech 10 IP65 Touch Manual

Product: