Manual Faytech 10 IP65 Touch (page 51 of 65) (English, German)

592244

Zoom out

Zoom in

1/65

You can adjust the parameter for the Constant Touch Area function. This is a criterion to judge

if the most recent touched point is the same as the previously touched point. If the difference

between the two points is within this area, it will be recognized as the same touch point and the

driver does not generate a new mouse event for this touch point.

You can adjust the Auto Right Click Time function. If the touch screen is touched and held for

this period of time, the driver generates a right mouse click.

3. Tools tab:

You can adjust the faytech touch panel calibration with the functions called 4 Points

Calibration, Clear and Calibrate, Linearization and Draw Test. Start by performing the 4

points calibration. By using the application drawing test, you can test the touch panel to

determine if further setting changes are desirable.

When you press the 4 Points Calibration button, the surface of the monitor shows the following

image:

Press blinking X symbol until stop blinking Touch and hold each of the blinking X symbols in

the calibration window until it stops blinking to make sure that the utility can gather enough

data for computation. In addition, a progress bar is shown at the bottom of the window to

indicate time elapsed. If the touch screen is not touched before the progress bar gets to the far

right, the calibration task will be terminated automatically.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Faytech 10 IP65 Touch in the language / languages: English, German as an attachment in your email.

The manual is 2,52 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Faytech 10 IP65 Touch Manual

Product: