Manual Fastnet FMD55P (page 53 of 89) (English)

522127

Zoom out

Zoom in

1/89

9.8. Connecting An Active Antenna

The FMD55 is prepared for the supply of an active antenna

with 12V DC max. and approx. 300mA. This however not

activated on delivery. On the output of the antenna there

would be a constant 12 V and on connecting a balun

transformer, the power would be short circuited.

In order to activate the power supply you must insert the

glass fuse supplied (500 map slow-blow).

For this you must unscrew the four screws on the side, and

remove the half-casing containing the loudspeaker. To do

this, pull out the casing about 5mm and lift carefully. Pull out

the connection for the speaker. Insert the fuse in holder

found next to the antenna connection. Place the half-

casing back in its original position and reconnect the

antenna socket. Now replace the casing under the front

frame as withdrawn so that the screw-holes are exactly

conforming and screw together.

From now on there is a voltage o 12 V on the internal

conductor of the antenna socket.

For antennæ installation suggestions please see the next

three pages

www.Busse-Yachtshop.de email: info@busse-yachtshop.de

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fastnet FMD55P in the language / languages: English as an attachment in your email.

The manual is 1,76 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fastnet FMD55P

Fastnet FMD55P User Manual - German - 103 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fastnet FMD55P Manual

Product: