522127

Fastnet FMD55P Manual

17
Zoom out
Zoom in
Previous page
1/89
Next page
From the number displayed, the frequency can be calculated
as follows:
Frequency = 735 + 7.5 x n(Hz).N = number displayed
The CF of 1500Hz should correspond to the channel number
102. This means that during MORSE decoding, the number
appearing should be between 85 to 120. Should the number
differ greatly, then it is possible that the frequency is not
properly tuned. The white level for FAX in the SW range should
lie between 40 and 60. The two frequencies in RTTY and SITOR
should be roughly symmetrical around 102. Likewise in NAVTEX
they should be symmetrical around 102 but with an additional
distance of about 20 to 26.
3.1. Selecting Mode and Decoding Types
In most manuals, the station mode is depicted as A1A, F1B
etc. The following table is an overlook of the practised
abbreviations for transmission modes in marine radio.
The settings matching for the receiver and decoder can also
be taken from the table.
www.Busse-Yachtshop.de email: info@busse-yachtshop.de
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fastnet FMD55P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fastnet FMD55P in the language / languages: English as an attachment in your email.

The manual is 1,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fastnet FMD55P

Fastnet FMD55P User Manual - German - 103 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info