522123
40
Zoom out
Zoom in
Previous page
1/72
Next page
9.3.
Power Supply Connection
Plug the pre-assembled cable supplied into the socket at the rear.
The clip on connection is self-locking. To release, the lock clip must be
pressed in the direction of the casing with a suitable tool.
The unit was manufactured to operate on a supply voltage of 11V to
15V DC (12V battery). The FMD15 has reverse battery and over
voltage protection. Should an incorrect connection take place,
check the fuse and if necessary, replace.
The power cable is shielded to suppress disturbances. The open end is
ready for connection and is fitted with a terminal strip.
The connection should be as near as possible to the distribution panel
or the battery. It is most important, that the current is completely free
of interference. Should there be any doubt, we recommend, that you
fit a suppression filter.
Before switching on, we recommend you to test the polarity and the
voltage at the terminals on the unit.
brown
g
reen
yell./green
yellow
white
page 9.8.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fastnet FMD15 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fastnet FMD15 in the language / languages: English as an attachment in your email.

The manual is 2,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fastnet FMD15

Fastnet FMD15 User Manual - German - 75 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info