18
3. Setting of system parameter:
a) Warning tone: Turn on or turn off the key tone.
b) Status Indicator: Please turn it on or off before self timing, the default setting is “ON”.
c) Loop coverage: The video/ audio file will be auto saved in segment once every 15 minutes when
setting “Loop Coverage”. If it is not set, the video/ audio file will be auto saved in segment once every
30 minutes.
Note: The segment size is determined by the file size, not the actual recording. According files are
segmented in the dark in more than 15/30 minutes, because the file size decreases in the dark and the
same recording time.
d) Auto standby: Set the auto standby time to 0, 2 minutes, 5 minutes or 10 minutes. If there’s mission
or operation, the system will start the standby countdown and the device will turn off. If there is an
operation during the countdown, the system will restart it. If video recording or the shutter is operated
in the standby mode, the device will be waked up. The default standby time is 5 minutes.
e) TV output format: NTSC or PAL video format output to TV. If the selected format is changed, please
unplug the AV cable and then reinsert it to update the parameters.
f) Contrast: The product is preset with standard contrast ratio. If necessary, the contrast ratio can be
increased for a better night shot.
g) ISO: The preset ISO sensitivity is activated as default. If necessary, ISO800 can be set for a better
night shot.
