Manual Falmec Move Green Tech (page 16 of 64) (All languages)

709848

Zoom out

Zoom in

1/64

regulations in the country of use. It must also

comply with European standards regarding radio

antistatic properties.

Before installing the hood, check that the electrical

mains power supply corresponds with what is report-

ed on the identication plate located inside the hood.

The socket used to connect the installed equipment

to the electrical power supply must be within reach:

otherwise, install a mains switch to disconnect the

hood when required.

Any changes to the electrical system must be carried

out by a qualied electrician.

The maximum length of the ue fastening screws

(supplied by the manufacturer) must be 13 mm. Use

of non-compliant screws with these instructions can

lead to danger of an electrical nature.

Do not try to solve the problem yourself in the event

of equipment malfunction, but contact the Dealer or

an authorised Servicing Department for repairs.

When installing the hood, disconnect

the equipment by removing the plug or

switching o the main switch.

FUMES DISCHARGE SAFETY

Do no connect the equipment to discharge

pipes of fumes produced from combustion

(for example boilers, replaces, etc.).

Before installing the hood, ensure that all standards in

force regarding discharge of air out of the room have

been complied with.

USER WARNINGS

These warnings have been drawn up for

your personal safety and those of others.

You are therefore kindly asked to read the

booklet carefully in its entirety before using the

or cleaning the equipment.

The Manufacturer declines all responsibility for

any damage caused directly, or indirectly, to per-

sons, things and pets as a consequence of failing

to comply with the safety warnings indicated in

this booklet.

It is imperative that this instructions booklet is

kept together with the equipment for any future

consultation.

If the equipment is sold or transferred to another per-

son, make sure that the booklet is also supplied so

that the new user can be made aware of the hood's

operation and relative warnings.

After the stainless steel hood has been installed, it

will need to be cleaned to remove any residues re-

maining from the protection adhesive as well as any

grease and oil stains which, if not removed, can cause

irreversible damage to the hood surface. To properly

clean the unit, the manufacturer recommends using

the supplied moist wipes, which are also available

sold separately. Insist on original spare parts.

INTENDED USE

The equipment is solely intended to be used to

extract fumes generated from cooking food in

non-professional domestic kitchens: any other

use is improper. Improper use can cause damage

to persons, things, pets and exempts the Manu-

facturer from any liability.

The equipment can be used by children over the age

of 8 and by persons with reduced physical, sensory

and mental abilities, or with no experience or knowl-

edge, as long as they do so under supervision or after

having received relative instructions regarding safe

use of the equipment and understanding of the dan-

gers connected to it.

Children are not to play with the equipment. Clean-

ing and maintenance by the user must not be carried

out by children without supervision.

USE AND CLEANING WARNINGS

Before cleaning or carrying out mainte-

nance operations, disconnect the equip-

ment by removing the plug or switching

o the main switch.

Do not use the hood with wet hands or bare feet.

Always check that all electrical parts (lights, extractor

fan) are o when the equipment is not being used.

The maximum overall weight of any objects placed

or hung (if applicable) on the hood must not exceed

1.5 Kg. Always supervise the cooking process during

the use of deep-fryers: Overheated oil can catch re.

Do not leave open, unattended ames under the

hood. Do not prepare food over an open ame under

the hood. Never use the hood without the metal an-

ti-grease lters: in this case, grease and dirt will depos-

it in the equipment and compromise its operation.

Accessible parts of the hood can be hot when used

at the same time as the cooking appliances. Do not

carry out any cleaning operations when parts of the

hood are still hot. There can be a risk of re if cleaning

is not carried out according to the instructions and

products indicated in this booklet. Disconnect the

main switch when the equipment is not used for long

periods of time.

If other appliances that use gas or other fu-

els are being used at the same time (boiler,

stove, replaces, etc.), make sure the room

where the fumes are discharged is well-ventilat-

ed, in compliance with the local

regulations.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Falmec Move Green Tech in the language / languages: All languages as an attachment in your email.

The manual is 25,34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Falmec Move Green Tech Manual

Product: