Manual Falmec mira isola top (page 26 of 80) (English, German, French, Italian, Polish, Spanish)

132943

Zoom out

Zoom in

1/80

SAFETY WARNINGS

The electrical system features an earth connection in compliance with interna-

tional safety standards; furthermore, it is compliant with the European standard

for electromagnetic compatibility.

Do not connect the appliance to flues (from boilers, fireplaces, etc.). Make sure

the mains voltage corresponds to the values on the rating plate located inside

the range hood. The minimum safety distance between the cooktop and the

range hood must be at least 65 cm.

Never cook on “open” flames under the range hood.

Check deep-fryers during use: superheated oil may be flammable.

- Ensure there is adequate ventilation of the room when the rangehood is used

at the same time as appliances burning gas or other fuels.

- Do not flambe under the rangehood

- The exhaust air must not be discharged into a flue which is used for exhaust-

ing fumes from appliances burning gas or other fuels.

- Ensure that all regulations concerning the discharge of exhaust air have been

fulfilled before you use the appliance.

Before performing any cleaning or maintenance operations, disconnect the

appliance by unplugging it or using the main switch. The manufacturer dis-

claims all liability for any damage that may be directly or indirectly caused

to people, things and animals due to the failure to follow all the instructions

provided in this booklet and above all the warnings relating to the installa-

tion, operation and maintenance of the appliance.

WARRANTY

The new equipment is covered by warranty.

The warranty conditions are provided by the distributor.

The manufacturer is not liable for any inaccuracies in this booklet resulting

from printing or transcription errors. The manufacturer reserves the right to

modify its products as it considers necessary or in the interests of the user,

without compromising their essential safety and operating characteristics.

HOODS MOUNTING INSTRUCTIONS

ALTAIR WALL HOOD ASSEMBLY

Phase 1

- Place on the wall support bar (A) (Fig. 1), at the same height of the cooker

resulting from the sum of the heights X + 260 mm.

- With a spirit level, verify the horizontal alignment and mark two drilling

points at the edges of bar n. 2.

- Drill, insert n. 2 expansion bolts of 8 mm Ø and fasten the bar with the rela-

tive screws.

Phase 2

- Hook the hood on the support bar.

- Adjust the alignment of the hood, using the fixing screws (Fig. 2): these can

be reached by opening panel (D) and removing anti-grease metal filters (E).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Falmec mira isola top in the language / languages: English, German, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 2,68 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Falmec mira isola top Manual

Product: