Manual Falmec Ghost (page 16 of 64) (English, German, French, Italian, Polish, Portuguese, Spanish)

709801

Zoom out

Zoom in

1/64

tion will automatically switch off. When the timer function is enabled, it is possible to switch

it off by pressing key 1.

Filter Reset: Every 30 hours of extractor fan operation, the filter signal will light up (steady red light).

With the motor and light switched off, holding down key T1 will delete the signal and the

shutter will open providing access to the filters. In this state it is not possible to start the

motor and keys T2..T5 are disabled. Once the filters are put back in place, holding down key

T1 will close the shutter and keys T2..T5 will start working again.

Opening the mobile part: When all of the leds are off (light and motor off) holding down this key allows

you to open the mobile part of the hood so that maintenance can be carried out. During this

state it is not possible to turn the motor on, keys T2..T5 are disabled. Key T1 is on.

Closing the mobile part: To exit the state where the mobile part is open and the is motor off, hold

down key T1. The red T1 signal switches off and the T2..T5 keys will start working again at

this time.

2: RECIRCULATION FUNCTION

Recirculation Function: When the motor is off, holding down key T2 will turn on the recirculation func-

tion, and the mobile part will open. Key T2 will flash. During the recirculation function (lasting

24 hours) the hood will stay on for 1 hour at the 1° (1st) speed, then it will stop for 3 hours and

switch back on for another hour. These cycles are repeated until timeout.

When this function is enabled, other speeds may not be selected. To switch this function off,

hold the T2 key down for at least 3 seconds. When the recirculation function is on the shutter

stays open regardless of whether the motor is on / off.

3: DECREASE IN FAN SPEED

By pressing this key the motor will slow to the first speed.

4: FAN ON/OFF

Pressing this key turns the fan on/off at the same time as the shutter opens/closes. The

number of lights that light up on keys T3-T4-T5 indicates the fan speed level.

5: INCREASE IN FAN SPEED

By pressing this key the motor will pick up to the third speed.

6: - LIGHT – RADIO CONTROL ACQUISITION

Light: Briefly pressing key T6 will turn the light on and off. Key T6 will light up if the light is on. If

the mobile part is closed, it will now open and the light will come on after a few seconds.

Radio control acquisition (optional): With the motor and light turned off, holding down key T6 will

enable remote binding mode. Key T6 will flash for a maximum of 10 seconds. While it is

flashing at least one radio control key must be pressed. The function will switch off when

the 10 seconds are over, or earlier if a compatible remote control is detected.

MANAGING USE OF THE KEYS:

Radio control (optional): Place the device away from sources of electromagnetic waves which may

interfere with the electronics of the hood. Maximum operating distance of 4 metres. This

distance may vary based on any electromagnetic interference from other devices.

Function of the

remote control

DESCRIPTION

Light Key

Pressing the Light key will switch the light on/off

‘ - ‘ Key

Pressing the ‘-’ Key will decrease motor speed. If 1° (1st) speed is in gear, pressing

the ‘-’ key will turn off the motor

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Falmec Ghost in the language / languages: English, German, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 0,88 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Falmec Ghost Manual

Product: