Manual Falmec Flipper NRS (page 15 of 60) (All languages)

709791

Zoom out

Zoom in

1/60

ENGLISH

The glass panels can only be cleaned with speciﬁc, non-corrosive or non-abra-

sive detergents using a soft cloth.

The Manufacturer declines all responsibility for failure to comply with these in-

structions.

CLEANING OF INTERNAL SURFACES

Do not clean electrical parts, or parts related to the motor inside

the hood, with liquids or solvents.

For the internal metal parts, see the previous paragraph.

METAL ANTI-GREASE FILTERS

It is advised to frequently wash the metal ﬁlters (at least once a month) leaving

them to soak in boiling water and cleaning solution for 1 hour, taking care not

to bend them.

Do not use corrosive, acid or alkaline detergents.

Rinse them well and wait for them to be completely dry before reassembling

them.

Washing in a dishwasher is permitted, however, it may cause the ﬁlter material to

darken: to reduce the possibility of this problem from happening, use low-tem-

perature washes (55°C max.).

To extract and insert the metal anti-grease ﬁlters see the assembly instructions.

HP/ACTIVE CARBON FILTERS (optional)

These ﬁlters retain the odours in the air that passes through them. The puriﬁed

air is recirculated into the environment.

The active carbon ﬁlters must be replaced on average every 3-4 months under

normal conditions of use

The HP active carbon ﬁlters reactivate by washing them in the dishwasher with

a normal detergent at a maximum temperature of 65°C and passing them in the

oven at 80°C for 20 minutes.

The maximum duration of the ﬁlter is 2/3 years with a maximum of 10 washings

per year.

LIGHTING

The range hood is equipped with high eﬃciency, low consumption LED spot-

lights with an extremely long life-span under normal use conditions.

Should the LED spotlight need to be replaced, proceed as shown in the ﬁgure.

12V

DISPOSAL AFTER END OF USEFUL LIFE

The crossed-out trash or refuse bin symbol on the appliance means

that the product is WEEE, i.e. “Waste electrical and electronic equip-

ment'', accordingly it must not be disposed of with regular unsort-

ed waste

(i.e. with ''mixed household waste''), but it must be disposed

of separately so that it can undergo speciﬁc processing for its re-use, or a specif-

ic treatment, to remove and safely dispose of any substances that may be harm-

ful to the environment and remove the raw materials that can be recycled. Prop-

er disposal of these products contributes to saving valuable resources and avoid

potential negative eﬀects on personal health and the environment, which may

be caused by inappropriate disposal of waste.

You are kindly asked to contact your local authorities for further information

regarding the designated waste collection points nearest to you. Penalties for

improper disposal of such waste can be applied in compliance with national

regulations.

INFORMATION ON DISPOSAL IN EUROPEAN UNION COUNTRIES

The EU WEEE Directive was implemented diﬀerently in each country, accord-

ingly, if you wish to dispose of this appliance we suggest contacting your local

authorities or dealer to ﬁnd out what the correct method of disposal is.

INFORMATION ON DISPOSAL IN NONEUROPEAN UNION COUNTRIES

The crossed-out trash or refuse bin symbol is only valid in the European Union: if

you wish to dispose of this appliance in other countries, we suggest contacting

your local authorities or dealer to ﬁnd out what the correct method of disposal is.

WARNING!

The Manufacturer reserves the right to make changes to the equipment at any

time and without prior notice. Printing, translation and reproduction, even par-

tial, of this manual are bound by the Manufacturer's authorisation.

Technical information, graphic representations and speciﬁcations in this manual

are for information purposes and cannot be divulged.

This manual is written in Italian. The Manufacturer is not responsible for any tran-

scription or translation errors.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Falmec Flipper NRS in the language / languages: All languages as an attachment in your email.

The manual is 19,79 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Falmec Flipper NRS Manual

Product: