Manual Falmec Ellittica - wall (page 23 of 88) (English, German, French, Italian, Polish, Portuguese, Spanish, All languages)

709781

Zoom out

Zoom in

1/88

- the yellow-green wire must be used for the earth,

- the blue/white wire must be used for the neutral,

- the brown/black wire must be used for the phase; the cable must not come into contact with

hot parts (over 70°C).

- fit a plug that is suitable for the load to the power cable, and connect it to a suitable power

outlet.

For appliances that come supplied with cable and plug please ensure they are plugged into a

circuit suitable for this appliance.

Please refer to a qualifed person. (See technical specifications in point B).

The manufacturer declines all liability if the safety standards are not observed.

RANGE HOOD WITH EXTERNAL EXHAUST (ex-

tractor hood)

In this version, the kitchen fumes and vapours are conveyed to the outside through an exhaust

pipe.

The exhaust conveyor protruding on the upper part of the hood must be connected to a pipe

carrying the fumes and vapours into an external output.

This version does not require the use of charcoal ﬁ lters supplied with hoods.

When the kitchen hood is used together with other appliances using gas or other fuels, the

room must be sufﬁ ciently ventilation according to current standards.

When used in Germany:

When a range hood is simultaneously in operation with appliances supplied with energy

other than electricity, the negative pressure in the room must not exceed 4 Pa (4 x 10-5 bar).

RECIRCULATING HOOD (filtering system)

In this model, air passes through charcoal ﬁ lters for puriﬁ cation and is then re-emitted into the

kitchen environment. For the installation of charcoal ﬁ lters, please refer to section H2.

For maximum efficiency, the third speed should be used when there are strong odours or a lot

of steam, the second speed in normal conditions, and the first speed for keeping the air clean

with minimum energy consumption. The range hood should be switched on when starting to

cook, and left on until the odours disappear.

OPERATION

ELECTRONIC CONTROL PANEL

Light pushbutton

• ON: light on (the pushbutton is lit);

• OFF: light off;

Pushbutton -

Press to reduce motor speed

Speed 1, 2 and 3 are indicated by the number of LEDs that light up (excluding the light and

the timer LEDs).

Pushbutton +

Press to increase motor speed

Speed 1, 2 and 3 are indicated by the number of LEDs that light up (excluding the light and

the timer LEDs).

English

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Falmec Ellittica - wall in the language / languages: English, German, French, Italian, Polish, Portuguese, Spanish, All languages as an attachment in your email.

The manual is 2,79 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Falmec Ellittica - wall Manual

Product: