709882

Falmec Domino 38 PLUS Manual

15
Zoom out
Zoom in
Previous page
1/48
Next page
15
ENGLISH
OPERATION AND
USE OF THE COOKTOP
When a cooking are is turned on, the bottom of the saucepan heats.
The cooking area only heats thanks to the heat given by the saucepan.
The cooktop automatically detects the size of the saucepan.
The heating power is to be chosen based on what shall be cooked.
Please nd below a short table:
SETTING AREAS
1 - 2
Melt
Heat
Sauces, butter, chocolate,
gelatine
Precooked dishes
2 - 3
Whisk
Defrost
Rice, pudding and cooked
dishes
Vegetables, sh, frozen food
3 - 4
Steam
Vegetables, sh, meat
4 - 5
Boil
Boiled potatoes, soups, pasta
Fresh vegetables
6 - 7
Cook over a low heat
Meat, liver, eggs, sausages
Goulash, rolate, tripe
7 - 8
Cook
Fry
Potatoes, donuts, cakes
9
Fry, bring to the boil
Steaks, omelettes
Boil
P
Fry, bring to the boil
Bring to the boil big
quantities of water
Remark: heating time of cooktops is shorter than the gas cookers.
BASIC FUNCTIONS
See table of the corresponding model in the previous page.
BRIDGE FUNCTION
This function allows for the simultaneous operation of the 2 cooking areas
To enable:
- Enable the cooktop;
For "38":
press simultaneously the symbols
+ :
- the symbol
(solo
display
destro)
will be displayed on the screen of the front cooking area;
- Push the keys + and – to set power.
For "38 Plus":
press simultaneously the symbols :
- the symbol
(solo
display
destro)
will be displayed on the screen of the back cooking area;
- Set the power with the slider of the front cooking area.
DEACTIVATION of the BRIDGE function:
For "38":
press simultaneously the symbols
+ .
For "38 Plus":
press simultaneously the symbols .
BOOSTER FUNCTION
The Booster strengthens power, so that big quantities can be heated (e.g. water to cook
pasta).
This power increase is enabled for max. 10 minutes.
For "38":
- Turn on the cooker;
- select the cooking area;
- touch (+) until on the screen
is displayed on the back cooking area.
Booster Activation
For the back cooking area, it is possible to enable a double booster:
- touch the key (+) until is displayed the symbol
(solo
display
destro)
+
.
If the front plate is adjusted in , the rear one cannot be adjusted beyond the level
. If the rear one is in , the front one turns o.
For "38 Plus":
- Turn on the cooker;
- touch the slider to bring power to
and then the key (+).
At the end of the Booster mode, power is automatically reduced to .
If a zone is in , the nearby area cannot be adjusted beyond level .
KEEP WARM FUNCTION
Version "38"
42°C - Keeping temperature of cooked dishes:
Turn on the cooker;
Select the cooking area;
Touch the key (+) : the symbol is displayed
.
Version "38 Plus"
Turn on the cooker;
Touch the key
regarding the concerned cooking area and select one of the 3 levels
of temperature:
42°C - Keeping temperature of cooked dishes
;
70°C - Keep on cooking
;
94°C - Bring to the boil
;
Shutdown of the cooker
To shutdown the cooking area:
Touch the key ( - ) until 0 is displayed on the screen of the cooking area.
If the cooking area is still too hot, the residual heat is specied
.
Turn o the cooker
Touch the key
: all cooking areas are deactivated.
On the display of the cooking areas that are still too hot, the symbol is displayed
.
Do not touch the cooking areas until the lamp is on.
TIMER FUNCTION
AND AUTOMATIC SHUTDOWN
The timer has two functions:
1 – TIMER;
2 – AUTOMATIC SHUTDOWN of one or more cooking areas.
It is possible to set the duration up to 99 minutes.
Once the time set is over, on the display regarding time 00 is shown and a sound warn-
ing is activated that can be deactivated pushing keys (+) or (-).
TIMER
Timer can be used with the cooker being on and o.
To set:
1. Press simultaneously the keys (+) and (-).
(on the Plus version the lamp is on );
2. Set the desired time touching keys (+) and (-).
Timer starts passing.
To modify time repeat the procedure from point 1.
To cancel timer:
1. Press simultaneously the keys (+) and (-).
(on the Plus version the lamp is on
).
2. Touch the key ( - ) to bring time to 00.
AUTOMATIC SHUTDOWN
For the automatic shutdown function:
1 - turn on the cooker;
2 - select the cooking area;
3 - select the level;
4 - set the timer as described above.
To set the automatic shutdown for another cooking area, repeat the procedure from
point 2.
TIMER and AUTOMATIC SHUTDOWN can be used simultaneously.
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Falmec Domino 38 PLUS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Falmec Domino 38 PLUS in the language / languages: English, German, Danish, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 8,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info