709886
12
Zoom out
Zoom in
Previous page
1/48
Next page
12
Bellaria
EN
In the BELLARIA, the air passes through the dust lter and ac-
tivated carbon lter and then through the ioniser which acts
against the pollutants present in the home, ionising and puri-
fying the air that is fed back into the environment.
OPERATION
Key
Description
Switches o and
reduces speed
Speed 1
Speed 2
Speed 3
("+" LED ashing)
Switching on and
increases
speed from 1 to 3
If pressed for 4 seconds, it activates
the automatic cycle:
BELLARIA will be activated only in the
presence of pollutants.
The function is disabled if:
there are no pollutants detected for
3 hours.
Keys
and are pressed.
and
ashing
Light ON/OFF
When the light is ON, press the button to
reduce the light intensity.
AIR QUALITY
The air quality is displayed by the colour
of the 3 leaves.
Green = optimum quality.
Yellow = presence of pollutants.
The more pollutants present, the more intense the colour yellow.
WHICH SPEED IS TO BE SELECTED?
- 1st speed: keeps the air clean with low noise
(green leaves).
- 2nd speed: normal conditions of use.
(moderately yellow leaves).
- 3rd speed: high presence of pollutants
(yellow leaves).
LIGHTING
BELLARIA is equipped with high-eciency, low-consumption LEDs, very
long life and "dimmer" function.
(see OPERATION)
Operating
and maintenance instructions
MAINTENANCE
Before carrying out any cleaning or maintenance opera-
tions, disconnect from the power supply.
Do not use detergents containing abrasive, acidic or cor-
rosive substances or abrasive cloths.
Regular maintenance guarantees proper operation and performance
over time.
Particular attention should be paid to the dust lter and honeycomb car-
bon lter: cleaning the lters frequently reduces deposits of dust or other
particulate matter.
CLEANING OF EXTERNAL SURFACES
It is recommended to clean the exterior surfaces of the BELLARIA peri-
odically: clean using a damp cloth slightly dampened with mild liquid
detergent or denatured alcohol. Finish o cleaning by rinsing well and
drying with soft cloths.
Do not use too much water next to the push button control
panel and lighting devices in order to prevent humidity from
reaching electronic parts.
The glass can only be cleaned with specic, non-corrosive or non-abra-
sive detergents using a soft cloth.
The Manufacturer declines all responsibility for failure to comply with
these instructions.
CLEANING OF INTERNAL SURFACES
It is forbidden to clean electrical parts, or parts related to the
motor or ioniser, with liquids or solvents.
For the internal metal parts, see the previous paragraph.
DUST FILTERS
For this reason it is recommended to clean
the lter frequently (at least every month)
using compressed air or by washing in a ba-
sin with warm water and a mild detergent.
Rinse it well and wait for it to be completely
dry before reassembling.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Falmec Bellaria at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Falmec Bellaria in the language / languages: All languages as an attachment in your email.

The manual is 7,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info