610456

FALLER 180652 Funf LEDs bunt gemischt Manual

2
Zoom out
Zoom in
Previous page
1/2
Next page
2
Spannungsversorgung: 12-16 V, Wechsel-/ Gleichspannung
Stromaufnahme: eine LED ca. 30 mA
Anschluss der LED an Wechselspannung: Ein Kabel an den linken 16 V, AC Anschluss klemmen und das andere an den rechten 16 V, AC Anschluss klemmen.
Anschluss der LED an Gleichspannung:
Ein Kabel an den 12 V, DC Anschluss klemmen. Das andere Kabel an den 0 V (Masse). Anschluss klemmen.
Für einen flackerfreien Betrieb bei Wechselspannung benötigen Sie den Gleichrichter 180633.
Ist keine Funktion gegeben muss man die Anschlüsse drehen.
Zur Befestigung befindet sich auf der Rückseite ein beidseitiger Klebestreifen.
Power supply: 12-16 V, AC/DC
Power consumption: one LED approx. 30 mA
To connect the LED to AC power: clamp one cable to the left 16 V, AC terminal and the other to the right 16 V, AC terminal.
To connect the LED to DC power:
clamp one cable to the 12 V, DC terminal. Clamp the other cable to the 0 V (ground) terminal.
In AC voltage mode you need rectifier 180633 for a flicker free operation.
If the LED does not function, reverse the terminals.
A double-sided adhesive strip is provided on the back to attach the LED.
Alimentation électrique : 12-16 V, courant alternatif/courant continu
Courant absorbé : 30 mA env. par LED
Raccordement des LED à une source de courant alternatif: Brancher un câble au raccordement 16 V, CA gauche et un autre au raccordement 16 V, CA droit.
Raccordement des LED à une source de courant continu:
Brancher un câble au raccordement 12 V, CC. Brancher l’autre câble au raccordement 0 V (terre).
Pour un fonctionnement correct sous courant alternatif, utiliser le redresseur réf 180633.
Si le dispositif ne fonctionne pas, il faut inverser les raccordements.
Un ruban adhésif double face de fixation se trouve au dos.
Spanningstoevoer: 12-16 V, wissel-/ gelijkstroom
Stroomopname: één LED ca. 30 mA
LED op wisselstroom aansluiten: Sluit één kabel aan op de linker 16 V, AC-aansluiting en de andere kabel op de rechter 16 V, AC-aansluiting.
LED op gelijkstroom aansluiten:
Sluit één kabel aan op de 12 V, DC-aansluiting. Sluit de andere kabel aan op de 0 V-aansluiting (massa).
Om bij gebruik van wisselstroom lichtflikkeringen te vermijden heeft u de gelijkrichter 180633 nodig.
Als de LED niet werkt, moeten de kabels worden omgewisseld.
Ter bevestiging bevindt zich aan de achterzijde een dubbelzijdige plakstrook.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for FALLER 180652 Funf LEDs bunt gemischt at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of FALLER 180652 Funf LEDs bunt gemischt in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info