610455
2
Zoom out
Zoom in
Previous page
1/2
Next page
2
Spannungsversorgung: 12-16 V, Wechsel-/ Gleichspannung
Stromaufnahme: pro LED- Lichterkette ca. 60 mA
Anschluss der LED an Wechselspannung: Ein Kabel an den linken 16 V, AC Anschluss klemmen und das Andere an den rechten 16 V, AC Anschluss klemmen.
Anschluss der LED an Gleichspannung: Das rote Kabel an den 12 V, DC Anschluss klemmen. Das andere Kabel an den 0 V (Masse) Anschluss klemmen.
Für einen flackerfreien Betrieb bei Wechselspannung benötigen Sie den Gleichrichter 180633.
Achtung: Lichterkette nur auf einer Seite anschließen.
Die Lichtleisten können einmalig im spannungsfreien Zustand an den vorgegebenen Stellen geteilt werden und getrennt voneinander betrieben werden.
Zur Befestigung der Leisten liegen beidseitige Klebestreifen bei.
Power supply: 12-16 V, AC/DC
Power consumption: per strip of LED fairy lights approx. 60 mA
To connect the LED to AC power: clamp one cable to the left 16 V, AC terminal and the other to the right 16 V, AC terminal.
To connect the LED to DC power: clamp the red cable to the 12 V, DC terminal. Clamp the other cable to the 0 V (earth) terminal.
In AC voltage mode you need rectifier 180633 for a flicker free operation.
Caution: connect light festoon on one side only.
The strips of fairy light can be split once in a voltage-free state at the specified places and operated separately from each other.
Double-sided adhesive strips are provided to attach the strips of fairy lights.
Alimentation électrique : 12-16 V, courant alternatif/courant continu
Courant absorbé : 60 mA env. pour une guirlande lumineuse à LED
Raccordement des LED à une source de courant alternatif: Brancher un câble au raccordement 16 V ca gauche et l’autre au raccordement 16 V, ca droit.
Raccordement des LED à une source de courant continu: Brancher le câble rouge au raccordement 12V cc. Brancher l’autre câble au raccordement 0 V (terre).
Pour un fonctionnement correct sous courant alternatif, utiliser le redresseur réf 180633.
Attention: Ne raccorder les guirlandes lumineuses que d’un seul côté.
Les rampes de guirlandes lumineuses peuvent être divisées une fois aux endroits donnés lorsqu’elles sont hors tension et fonctionner séparément
les unes des autres.
Des rubans adhésifs double face sont fournis pour fixer les rampes de guirlandes lumineuses.
Spanningstoevoer: 12-16 V, wissel-/ gelijkstroom
Stroomopname: per LED-keten ca. 60 mA
LED op wisselstroom aansluiten: Sluit één kabel aan op de linker 16 V, AC-aansluiting en de andere kabel op de rechter 16 V, AC-aansluiting.
LED op gelijkstroom aansluiten: Sluit de rode kabel aan op de 12 V, DC-aansluiting. Sluit de andere kabel aan op de 0 V-aansluiting (massa).
Om bij gebruik van wisselstroom lichtflikkeringen te vermijden heeft u de gelijkrichter 180633 nodig.
Let op: lichtslang mogen slechts aan één zijde worden aangesloten.
De lichtstrips kunnen eenmalig in spanningsvrije toestand op de aangegeven punten worden gedeeld en gescheiden van elkaar worden gebruikt.
Ter bevestiging van de lichtstrips zijn dubbelzijdige plakstroken bijgevoegd.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for FALLER 180649 LED-Lichterkette at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of FALLER 180649 LED-Lichterkette in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info