Manual FALLER 162100 Laser-Street Basis-Set Strassenelemente (page 5 of 11) (English)

610433

Zoom out

Zoom in

1/11

5Roadway design

Routeing streets: First determine

the street layout by simply positioning

the street sections. Connecting the

sections makes this a breeze. All road-

way sections have a laser cut groove

which will later hold the contact wire.

Attention: Glue the sections fully to

the background.

Variable routeing: The flexible La-

ser-Street track makes route variations

very easy. This street section is varia-

ble and allows the respective routeing

in the tightest of spaces. Customise

your street route with minimal effort.

Drill holes: The break-out and the

offset for branches are prefabricated

in the contact wire routeing so that it

only needs to be inserted and secured.

Holes are predrilled in any wise loca-

tion along the contact wire routeing

for inserting sensors.

Installation: Thanks to the various

installation aids adding a bus stop for

example takes mere minutes. The gen-

eral system of the functional compo-

nents can also be seen on these parts,

making implementing custom ideas

significantly easier.

Curves: Vehicles swing out, just as in

real traffic, i.e. if traffic enters a

curve the wire is routed outward. The

curve sections can be used from both

sides so that the same section can be

used for right and left curves.

Terrain transitions: The street sec-

tions are made from 3 mm thick

three-layered plywood and are flexible

yet very sturdy. Use small rigid foam

blocks to create uneven pavements and

terrain transitions.

Installation aids: All roadway sec-

tions are primed for installing func-

tional elements. Regardless if it’s a

Branch-off junction (161677), Stop sec-

tion

(161675), Parking space (161674)

or a Sensor (161773). We have provid-

ed installation aids for every element.

Combined method: To customise your

design even further use 3 mm plywood

to build your own route sections. Sim-

ply disconnect the street element joints

and shorten them to the desired length.

Then integrate a piece of plywood.

Groove cutter: Now preferably mark

the desired driving path and cut the

groove for the contact wire with a

Groove Cutter (161669). Implementing

your ideas doesn’t get any easier and

quicker. This allows you to build any

design you would like yet benefit from

FALLER Laser-Street.

Laser-Street – Step by Step

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of FALLER 162100 Laser-Street Basis-Set Strassenelemente in the language / languages: English as an attachment in your email.

The manual is 7,04 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of FALLER 162100 Laser-Street Basis-Set Strassenelemente

FALLER 162100 Laser-Street Basis-Set Strassenelemente Installation Guide - German - 13 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

FALLER 162100 Laser-Street Basis-Set Strassenelemente Manual

Product: