500344

Falcon Toledo XT 110 Manual

41
Zoom out
Zoom in
Previous page
1/60
Next page
41
English
Oven temperature getting hotter as the cooker gets
older
If turning the knob down has not worked or only worked
for a short time then you may need a new thermostat. This
should be fi tted by a service person.
The oven light is not working
The bulb has probably blown. You can buy a replacement
bulb (which is not covered under the guarantee) from a
good electrical shop. Ask for an Edison screw fi tting 15w
240v lamp, FOR OVENS. It must be a special bulb, heat
resistant to 300 °C.
Turn off the power supply.
Make sure the oven is cool. Open the oven door and remove
the oven shelves.
Unscrew the bulb cover by turning anticlockwise. It may be
very stiff .
Taking care to protect your fi ngers in case the bulb should
shatter, unscrew the old bulb.
Screw in the new bulb, screw back the bulb cover. Turn on
the electricity supply and check that the bulb now lights.
Hotplate ignition or hotplate burners faulty
Is the power on? Is the clock illuminated? If not there maybe
something wrong with the power supply.
See ‘power supply’ section further on.
Are the sparker (ignition electrode) or burner slots blocked
by debris?
Is the burner trim correctly located?
Are the burner caps correctly located?
See the section entitled ‘Cleaning’
Hotplate burners will not light
Make sure that the burner parts have been replaced
correctly after wiping or removing for cleaning.
Check that there is not a problem with your gas supply. You
can do this by making sure that other gas appliances you
may have are working.
Do the burners spark when you push the button? If not
check the power is on - is the clock illuminated?
General Safety Instructions
This appliance must be installed by a competent person.
The installation must be in accordance with the in stal la tion
instructions and comply with the relevant regulations
and also the local gas and electricity supply companies’
requirements.
If you smell gas
Don’t turn electric switches on or off.
Don’t smoke
Don’t use naked flames
Do turn off the gas at the meter or cylinder
Do open doors and windows to get rid of the gas
Do keep people away from the area affected
Call your gas supplier.
This appliance is designed for domestic cooking only. Use
for any other purpose could invalidate any warranty or
liability claim.
The use of a gas cooking appliance results in the production
of heat and moisture in the room in which it is in stalled.
Ensure that the kitchen is well ventilated: keep nat u ral
ven ti la tion holes open or install a mechanical ventilation
device, (mechanical extractor hood).
Prolonged intensive use of the appliance may call for
additional ventilation, for ex am ple opening a window, or
more eff ective ventilation, for example in creas ing the lev el
of mechanical ventilation where present.
The cooker should be serviced by a qualifi ed service
engineer and only approved spare parts used. Have the
installer show you the location of the cooker control switch.
Mark it for easy reference. Always allow the cooker to
cool and then switch off at the mains and before cleaning
or carrying out any maintenance work, unless specifi ed
otherwise in this guide.
All parts of the cooker become hot with use and will
retain heat even after you have stopped cooking.
Take care when touching cooker, to minimize the possibility
of burns, always be certain that the controls are in the OFF
position and that it is cool before attempting to clean the
cooker.
Use dry oven gloves when applicable - using damp
gloves might result in steam burns when you touch a hot
surface. Never operate the cooker with wet hands.
Do not use a towel or other bulky cloth in place of a glove.
They might catch fi re if they touch a hot surface.
Clean with caution. If a wet sponge or cloth is used to
wipe spills on a hot surface, be careful to avoid steam
burns. Some cleansers can produce noxious fumes if
applied to a hot surface.
Do not use unstable saucepans and position the handles
away from the edge of the hotplate.
… 41 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Falcon Toledo XT 110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Falcon Toledo XT 110 in the language / languages: English, French as an attachment in your email.

The manual is 1,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info