659604
35
Zoom out
Zoom in
Previous page
1/44
Next page
31
INSTALLATION
Nach Abschluss prüfen, ob das Gerät elektrisch sicher ist.
Art No 215-0028 - Handrail fascia fixings
Classic, Classic Deluxe & Elan Nur: Die Kunststostopfen in die
Befestigungslöcher setzen (Abb.7-11).
Inbusschrauben (4 mm) von den oberen Ecken der Blende
entfernen (Abb.7-12). Vorderen Handlauf anbringen und mit
den 4 mm Schrauben befestigen.
Anbringen den einteiligen Sockel montieren
Die drei Schrauben an der vorderen Unterkante des Herdes
lösen. Das mittlere Schlüsselloch über die mittlere Schraube
haken. Jedes Endschlüsselloch verdrehen und auf seine
jeweiligen Schrauben setzen (Abb.7-13).
Anbringen den zweiteiligen Sockel Montieren
(Classic Deluxe & Professional Deluxe)
Den inneren Sockel mit den fünf mitgelieferten Schrauben
vorne an der Unterseite des Herds anbringen (Abb.7-14).
Den äußeren Sockel (zwei Schrauben, eine auf jeder Seite)
am inneren Sockel anbringen. Die Höhe des äußeren Sockels
kann angepasst werden, indem er über das geschlitzte Loch
hoch-oder heruntergeschoben wird (Abb.7-15).
Anbringen des Sockels (Hi-LITE)
Die Schlüssellochschlitze am äußeren Sockel mit den
Positionierungspunkten am inneren Sockel ausrichten.
(Abb.7-16).
Der äußere Sockel sollte sich automatisch an die Bodenhöhe
anpassen (Abb.7-16).
ACHTUNG: Beim Verschieben des Herdes
sicherstellen, dass der äußere Sockel entfernt wird.
Bei Nichtbeachtung könnten Schäden am Sockel und
Boden entstehen.
Anbringen des Spritzschutzes (Classic, Classic
Deluxe & Elan)
Bringen Sie den Spritzschutz an der Rückseite der Kochstelle
an und befestigen Sie ihn mit den mitgelieferten Schrauben.
Kundendienst
Installateur: Bitte tragen Sie Ihre Kontaktdaten vorne in
diesem Abschnitt ein. Bitte informieren Sie den Benutzer
über die Bedienung des Herdes und übergeben Sie ihm den
Anleitungs.
Vielen Dank.
ArtNo.350-0012 - Securing the plinth
Abb.7-12
ArtNo.350-0010 - Fitting the plinth 1 (Kitchener)
Abb.7-13
ArtNo.350-0011 - Fitting the plinth 2 (Kitchener)
Outer plinth
Outer plinth xing screw
Inner plinth
Abb.7-14
Befestigungsschraube für äußeren Sockel
Äußerer Sockel
Innerer Sockel
Abb.7-15
Abb.7-16
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Falcon Nexus 110 Induction at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Falcon Nexus 110 Induction in the language / languages: German as an attachment in your email.

The manual is 6,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info