Manual Falcon De Luxe 1092 Cooktop (page 27 of 36) (English)

500341

Zoom out

Zoom in

1/36

SERVICING  WARNING

Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished.

Conversion to LP Gas

Servicing - warning

This conversion must be performed by a competent

person. After conversion the installation must comply

with the relevant regulations and also the local electricity

supply company requirements. Read the instructions

before converting this appliance.

Failure to convert the appliance correctly could invalidate

any warranty or liability claims and lead to prosecution.

This instruction must be used in conjunction with the rest

of the appliance instruction, in particular for information

on Standards, cooker positioning, connection hose

suitability etc.

When servicing or replacing gas-carrying components

disconnect from gas before commencing operation and

check appliance is gas sound after completion.

Do not use re-conditioned or unauthorised gas controls.

Conversion

Disconnect from electricity and gas before servicing.

Check appliance is safe when you have ﬁ nished.

This appliance is CAT II 2H3+. It is supplied set for G20

natural gas at 20millibar

A conversion kit for LP gas is supplied with the cooker.

Injectors

Remove pan supports and burner heads.

Burner head

Brass venturi

Burner base

Burner ring

Undo the large brass nuts and remove the brass venturis

and brass rings.

Either:-

Use a long box spanner to access and remove the

old jets.

Or: -

Lift up the front of the hotplate top and prop it up.

The burner bases are now accessible - remove the

old jets.

Save the jets removed from the appliance for possible

future use. Fit the new jets; see the table for the correct

type.

If you have lifted up the hotplate then carefully replace

it taking care not to damage or displace the ignition

electrodes or ﬂ ame safety probes (arrowed) and replace

the rear ﬁ xing screws.

To convert the control taps

Pull oﬀ all the control knobs.

Open the oven door & grill door and remove the ﬁ xing

screws underneath the control panel.

Remove the 3 ﬁ xing screws at the top of the control panel.

Pull the control panel forward. Rest it on the open grill

door and the open right hand oven door

The tap bypass screw is now accessible. Unscrew the tap

bypass screw.

Using a pair of long nose pliers carefully remove the

bypass screw and ﬁ t the correct replacement screw. See

table for correct size. Tighten the screw down.

Repeat for all the burner control taps.

Reﬁ t the control panel.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Falcon De Luxe 1092 Cooktop in the language / languages: English as an attachment in your email.

The manual is 0,94 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Falcon De Luxe 1092 Cooktop Manual

Product: