Manual Falcon De Luxe 1092 Continental (page 27 of 56) (English, German)

500340

Zoom out

Zoom in

1/56

SERVICING  WARNING

Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished.

17 To Adjust the Oven Door Catch Keeper

a) Open the oven door and slacken the locknut at the

keeper base.

b) Adjust the keeper inward or outward as required, until

the desired door operation is obtained.

c) Re-tighten the locknut.

18 To Remove the Hotplate Spark Generator

Disconnect the appliance from the electricity supply.

a) Pull the unit forward to access the cover boxes at the

appliance rear. Remove the ﬁ xings that secure the cover

and lift it clear.

b) Undo the terminal connections noting their positions.

c) Undo the ﬁ xings that secure the spark generator and

remove the device.

19 To Remove the Hotplate Electrode Leads

Disconnect from the electricity supply.

Pull the unit forward to access the rear of the appliance.

a) Remove the pan supports, hotplate accessories and

burner heads.

b) Remove the hotplate as detailed in Section 2.

c) Remove the cover box and disconnect all HT leads at the

generator.

d) Remove the lower back panel and disconnect the lead at

the electrode.

e) Pull the sleeved bundle of HT leads up through the rear

upright.

f) Pull the appropriate lead from the sleeve and push in the

replacement.

g) Replace the leads in the rear upright.

h) Re-connect the leads at the generator and oven

electrode.

j) Re-assemble in reverse order and check ignition.

20 To Remove Oven Inner Back

a) Open the oven door. For the LH oven unscrew the 2

thermostat phial ﬁ xing screws. Remove the ﬁ xings that

secure the inner back to the oven rear.

b) Lift the removable panel away.

c) Re-assemble in reverse order. Ensure that the retaining

ﬁ xings are fully tightened.

21 To Replace an Oven Fan

Disconnect the appliance from the electricity supply.

a) Pull the unit forward to access the cover boxes at the rear

of the appliance. Remove the ﬁ xings that secure the cover

and lift it clear.

b) Remove the fan wiring, noting the connection positions.

c) Remove the inner back as detailed in Section 20.

d) Hold the fan blades and undo the centre nut (LH thread),

brass washers, fan blade and circlip.

e) Undo the ﬁ xings that retain the fan and remove it from

the cavity rear.

f) Fit the replacement and re-assemble parts in reverse

order. Check that the oven operates satisfactorily.

22 To Remove an Oven fan Element

Disconnect the appliance from the electricity supply.

a) Remove oven inner back (see 20).

b) Remove 2 screws from the top of the element and 1 from

the bottom of the element in side the oven.

c) Lift element out carefully, disconnect the terminals

connected to the element noting their positions. If it

is not possible to disconnect the leads in this way, pull

cooker forward to gain access to the rear, remove screws

securing the electric cover to the back sheet and remove

cover and disconnect the terminals from the rear.

d) Fit new element, and reassemble in reverse order.

e) Check that the oven operates correctly.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Falcon De Luxe 1092 Continental in the language / languages: English, German as an attachment in your email.

The manual is 1,68 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Falcon De Luxe 1092 Continental

Falcon De Luxe 1092 Continental User Manual - Dutch - 30 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Falcon De Luxe 1092 Continental Manual

Product: