500339

Falcon De Luxe 1092 Ceramic Manual

28
Zoom out
Zoom in
Previous page
1/32
Next page
WARNING - SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON
Disconnect from electricity supply before servicing. Check appliance is safe when you have finished.
Page 28
3.15 TO REMOVE DOOR LATCH
a) Remove oven outer door panel as detailed in Section
3.14.
b) Remove fixings which secure latch assembly to inner
door panel. (See Figure 4).
c) Fit replacement catch and re-assemble in reverse order.
d) Check correct operation of door.
3.16 TO REMOVE OVEN DOOR SEAL
a) Remove outer door panel as detailed in Section 3.14.
b) Remove door bedding strip by sliding from clips on rear
face of inner door panel see Figure 5).
c) Fit replacement door seal and re-assemble in reverse
order.
3.17 TO ADJUST OVEN DOOR CATCH KEEPER
a) Open oven door and slacken locknut at keeper base.
b) Adjust keeper in or out as required, until desired door
operation is obtained.
c) Re-tighten locknut.
3.18 TO REMOVE OVEN LININGS
a) Open oven doors and remove shelves.
b) Slide oven roof lining forward to remove it. (RH oven
only)
c) Slide oven base forward and remove.
d) Lift oven side linings away from hanging screws and re-
move lining.
e) Replace all linings in reverse order.
3.19 TO REMOVE RH OVEN INNER BACK
a) Open RH oven door and remove fixings that secure in-
ner back to oven rear.
b) Lift removable panel away.
c) Re-assemble in reverse order. Ensure retaining fixings
are fully tightened.
3.20 TO REPLACE RH OVEN FAN
Disconnect appliance from electricity supply.
a) Pull unit forward to access cover boxes at appliance rear.
Remove fixings that secure cover and lift it clear.
b) Remove fan wiring, noting connection positions.
c) Remove inner back as detailed in Section 3.19.
d) Hold fan blades and undo centre nut (LH thread), brass
washers, fan blade and circlip.
e) Undo fixings that retain fan and remove it from the cavity
rear.
f) Fit replacement and re-assemble parts in reverse order.
Check oven operates satisfactorily.
3.21 TO REMOVE RH OVEN ELEMENT
Disconnect appliance from electricity supply.
a) Pull unit forward to access cover boxes at unit rear. Re-
move fixings that secure cover and lift it clear.
b) Undo terminal connections, noting their positions.
c) Remove inner back as detailed in Section 3.19.
d) Remove fixings that secure element within oven and lift
element away carefully.
e) Fit the replacement element and re-assemble parts in
reverse order.
f) Check oven operates correctly.
3.22 TO REMOVE LH OVEN ELEMENTS
Disconnect appliance from electricity supply.
3.22.1 Bottom Element
a) Pull unit forward to access cover boxes at unit rear. Re-
move fixings that secure cover and lift it clear.
b) Undo terminal connections, noting their positions.
c) Remove fixings that secure bottom element cover.
d) Undo terminal connections, noting their positions.
e) Remove the lower element support fixings.
f) Remove element bracket fixings and withdraw element.
g) Replace element and re-assemble parts in reverse or-
der.
3.22.2 Top Element
a) Open LH oven door and undo fixings that secure heat
shield.
b) Remove top element bracket fixings and withdraw ele-
ment.
c) Replace element and re-assemble parts in reverse or-
der. Check oven operates satisfactorily.
3.23 TO REMOVE GRILL ELEMENT
Disconnect appliance from electricity supply.
a) Pull unit forward to access the cover boxes at the appli-
ance rear. Remove fixings that secure cover and lift it
clear.
b) Undo terminal connections, noting their positions.
c) Remove grill pan.
d) Remove fixings that secure element front support from
within chamber.
e) Remove fixing from each element and withdraw ele-
ments from chamber.
f) Fit replacement element(s) and re-assemble parts in re-
verse order. Check grill operation.
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Falcon De Luxe 1092 Ceramic at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Falcon De Luxe 1092 Ceramic in the language / languages: English as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info