326872

Falcon 900 deluxe inox Manual

28
Zoom out
Zoom in
Previous page
1/32
Next page
SERVICING - WARNING
Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished.
28
b) Proceed to the next hook and release it in a similar
way, and so on. Use force if the hooks are stiff, as
the old seal will be discarded.
c) When fitting new seal, position the seal join at the
bottom. Hook the new seal in one of the corner holes
of the door, and proceed round the door snapping in
each hook in turn.
18 To Adjust the Oven Door Catch Keeper
a) Open the oven door and slacken the locknut at the
keeper base.
b) Adjust the keeper inward or outward as required,
until the desired door operation is obtained.
c) Re-tighten the locknut.
19 To Remove the Hotplate Spark Generator
Disconnect the appliance from the electricity supply.
a) Pull the unit forward to access the cover boxes at the
appliance rear. Remove the fixings that secure the
cover and lift it clear.
b) Undo the terminal connections noting their positions.
c) Undo the fixings that secure the spark generator and
remove the device.
20 To Remove the Hotplate Electrode Leads
Disconnect from the electricity supply.
Pull the unit forward to access the rear of the
appliance.
a) Remove the pan supports, hotplate accessories and
burner heads.
b) Remove the hotplate as detailed in Section 1.
c) Remove the cover box and disconnect all HT leads
at the generator.
d) Remove the lower back panel and disconnect the
lead at the electrode.
e) Pull the sleeved bundle of HT leads up through the
rear upright.
f) Pull the appropriate lead from the sleeve and push in
the replacement.
g) Replace the leads in the rear upright.
h) Re-connect the leads at the generator and oven
electrode.
j) Re-assemble in reverse order and check ignition.
21 To Remove Oven Inner Back
a) Open the oven door. For the LH oven unscrew the 2
thermostat phial fixing screws. Remove the fixings
that secure the inner back to the oven rear.
b) Lift the removable panel away.
c) Re-assemble in reverse order. Ensure that the
retaining fixings are fully tightened.
22 To Replace an Oven Fan
Disconnect the appliance from the electricity supply.
a) Pull the unit forward to access the cover boxes at the
rear of the appliance. Remove the fixings that secure
the cover and lift it clear.
b) Remove the fan wiring, noting the connection
positions.
c) Remove the inner back as detailed in Section 21.
d) Hold the fan blades and undo the centre nut (LH
thread), brass washers, fan blade and circlip.
e) Undo the fixings that retain the fan and remove it
from the cavity rear.
f) Fit the replacement and re-assemble parts in reverse
order. Check that the oven operates satisfactorily.
23 To Remove an Oven fan Element
Disconnect the appliance from the electricity supply.
a) Pull the unit forward to access the cover boxes at the
rear of the appliance. Remove the fixings that secure
the cover and lift it clear.
b) Undo the terminal connections noting their positions.
c) Remove the inner back as detailed in Section 21.
d) Remove the fixings that secure the element within
the oven and lift the element away carefully.
e) Fit the replacement element and re-assemble parts
in reverse order.
f) Check that the oven operates correctly.
24 To Remove the LH Oven Bottom and Top
Elements
Disconnect the appliance from the electricity supply.
Bottom Element
a) Pull the unit forward to access the cover boxes at the
rear of the unit. Remove the fixings that secure the
cover and lift it clear.
b) Undo the terminal connections, noting their positions.
c) Remove the fixings that secure the bottom element
cover.
d) Undo the terminal connections, noting their positions.
e) Remove the lower element support fixings.
f) Remove the element bracket fixings and withdraw
element.
g) Replace the element and re-assemble parts in
reverse order.
Top Element
a) Open the LH oven door and undo the fixings that
secure the heat shield.
b) Remove the top element bracket fixings and
withdraw element.
c) Replace the element and re-assemble parts in
reverse order. Check that the oven operates
satisfactorily.
25 To Remove a Grill Element
Disconnect the appliance from the electricity supply.
a) Pull the unit forward to access the cover boxes at the
rear of the appliance. Remove the fixings that secure
the cover and lift it clear.
b) Undo the terminal connections, noting their positions.
c) Remove the grill pan.
d) Remove the fixings that secure the element front
support from within the chamber.
e) Remove a fixing from each of the elements and
withdraw the elements from the chamber.
f) Fit the replacement element(s) and re-assemble
parts in reverse order. Check operation of the grill.
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Falcon 900 deluxe inox at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Falcon 900 deluxe inox in the language / languages: English as an attachment in your email.

The manual is 0,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Falcon 900 deluxe inox

Falcon 900 deluxe inox User Manual - German - 30 pages

Falcon 900 deluxe inox User Manual - Dutch - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info